YI cameras are pretty affordable and easy on your budget. You can develop a complete security system without having to spend too much money. Moreover, the installation is pretty easy, and you won’t have to hire a general contractor to help with the installation of this unit. So, if you’re planning on upgrading your security budget on a small budget, YI cameras should be your first option.
One small issue that has annoyed some customers is that sometimes the YI camera will stop recording to the SD card. This issue is mostly related to a cheap SD card, and you need to check for issues with the storage device to isolate the issue. Here is a comprehensive troubleshooting guide to help you further through the issue.
YI Camera Not Recording To SD Card Fix:
- Try A Different SD Card
Almost all the issues with the SD card recording not working were related to the owners using a cheap or corrupted SD card. So, if you’re in the same boat, there is no harm in purchasing a new SD card for your device. Make sure to go with reputable brands like SanDisk for your unit. Hopefully, you won’t have to bother with the same issues when it comes to YI camera recording problems.
- Format The Storage Device
Formatting the storage device should be your next move if the SD card is in good shape. There might be some corrupted files on the SD card, and a quick format should get everything in order.
So, install the card in your camera and then format it directly through the application. That should be enough to help the camera recognize the SD card as a viable storage device, and you won’t have to worry about the same errors again.
- Try Rebooting The Camera
Rebooting the camera might seem like a simple fix, but it has helped a ton of users get through recording issues. So, make sure to turn off the camera completely and remove all power connections for a few minutes.
After that, you can reconnect the batteries or the power cable to the camera and check the response from the unit. Ideally, it should recognize the storage device, and you won’t have to bother with more fixes when it comes to the YI camera.
- Reinsert the SD Card
Reinserting the SD card is always a good move when you’re dealing with these errors. There might be something stuck in the port, and you should thoroughly check the port for obstructions. Using an air blower to clean out the camera port is not a bad choice.
After that, you can try inserting the SD card back into the camera to check the response from the camera. If there are no hardware issues with the camera, you should be able to get the desired response from the SD card.
- Check For Hardware Issues
Hardware issues with the camera can also play a role in this issue, and if the camera is in rough space, you should contact the dealer. Depending on the warranty status, it shouldn’t be too difficult to grab a replacement for free.
So, make sure to involve the dealer, and inquire about the warranty policy. If your claim is valid, you can demand a replacement, and you won’t have to deal with the same recording issues when using the new camera. So, keep that in mind and thoroughly check the camera for hardware issues.
- Full Reset Your Camera
At this point, just reset the camera to fix programming issues with the camera. This reset will wipe away all the configurations, and you’ll have to go through the setup from the start. So, make sure to free up some time to go through all the settings and then check the recording features when using the SD card. If the issue is not fixed at this point, then you’ll be sure that the camera is defective, and you need to get it replaced to get the unit fixed.
Overall, the issue is mostly related to the SD card and not your camera. So, make sure to grab a replacement before going through a reset. Hopefully, the problem will be fixed with the new SD card, and you won’t have to bother with the same problem.