Wyze has been a dominant player in the smart home market for years. Its superior performance and durable units will help you with years of consistent results. So, whether you’re looking for cleaning units or security devices, make sure to test out the Wyze portfolio.
This brand shines primarily in the smart security units market. However, Wyze Vacuums have also become pretty popular over the last couple of months.
Wyze Vacuum Won’t Turn on
Customers are amazed by their cleaning performance, and you will be able to stick to a reasonable budget with Wyze.
Sadly, one issue that annoys some customers related to maintenance and charging level of the device is sometimes Wyze Vacuum won’t turn on.
This problem is never that serious, and you can address it pretty quickly. Here is a list of some troubleshooting methods that can be implemented when Wyze Vacuum won’t turn on. So, try out this list, and you will be all set!
- Charge Unit For A Few More Hours
Most of the time, the fix is as simple as charging the unit for a few more hours. So, if you’ve charged the unit for one or two hours, leave this unit on the charger for three to four hours. Depending upon the model you’re using, four hours should be enough.
However, there are a ton of other things that you need to consider when Wyze Vacuum won’t charge. So, follow through with fixing the power flow to the unit. You won’t be disappointed with this purchase.
- Manually Align The Contact points
If the unit is not charging at this point, then manually align the contact points. The issue might just be as simple as adjusting the alignment of the contact points. If the unit does charge after manually aligning the unit, then you will have to fix the placement of the dock.
You can rely on small cardboard pieces to adjust the height of the dock. Furthermore, it is a good idea to remove obstructions from the side of the unit. So, keep that in mind and fix the placement of the dock when dealing with the dock.
- Service Your Vacuum
It is common knowledge that keeping the unit in perfect shape is the most crucial element of owning a cleaning unit. So, if you’ve ignored the maintenance of your cleaning cycle, then now might be a good idea to do so.
All you have to do is to clean the base for a few minutes. Make sure that there is no debris stuck on the bottom of your unit. Similarly, try to remove hair and excessive gunk from the unit. From there, just fix the placement of the vacuum one more time.
- Check For Hardware Issues
The problems with the hardware might also be to blame here. If you’re not getting any response from the unit even after leaving it on the charging base for three hours, then check the hardware. Make sure that there are no cracks or damaged sections on the robot.
If you do find cracks or the usage is a bit rough, claim the warranty immediately. You might be able to grab a fresh piece depending upon the warranty status. So, keep that in mind as you test out the situation with Wyze Vacuum not turning on.
- Reinsert Battery
Sometimes, the fix here is as simple as removing the battery and installing it again. This is especially true for users that have recently bought a new battery. So, if you’re in the same situation, follow through with this power cycle method.
Make sure that the battery is compatible with the robot. If the model doesn’t match the power requirements of the robot, you will have to put your money into a new pack. So, refer to the dealer before buying a new battery.
- Buy A Battery Replacement
If you’ve yet to replace the battery and the unit has been in your possession for a few months, then now it might be a good idea to buy a new battery. The battery lifespan can extend to years depending upon the storage conditions and the basic usage.
However, if the temperature is a bit too high in your region, the battery life will deteriorate much faster. Your best bet is to grab a new battery pack and then try engaging the cleaning cycle one more time.
- Try Resetting Your Unit
If you can see that the unit is powered up, a quick reset might be your only move. However, you need to double-check that the LED status is engaged on your unit.
So, follow through with the reset routine. Most of the time, a quick reset will be enough to address minor programming errors. Ideally, that will be enough to help you through all issues with the unit programming.
- Fix Battery Placement
The issues with the Wyze vacuum not turning on can also be linked to incorrect battery placement. You have to make sure that the contacts are properly engaged and that the battery compartment is free from debris.
A bit of light cleaning will go a long way to fix these errors. You can further follow through with the manual instructions to isolate errors with the battery placement. Hopefully, you won’t have to get the vacuum replacement, and the issue will be fixed right here.
- Call Wyze Support
On the other hand, if you’re still stuck in the same errors, reach out to official support. The Wyze customer care team is one of the most reliable services on the market. You will get years of consistent support from this brand.
So, even if the warranty is expired or you damaged the unit yourself, try reaching out to these experts. They will make troubleshooting effortless for you.
You just have to explain the issues with the Wyze system not turning on thoroughly, and customer support will guide you through the rest.
Overall, the issue is mostly related to the charging status and battery condition. So, make sure you isolate the issue here, and you won’t have to worry about Wyze vacuum ever again.