Smart monitoring cameras are a great way of securing your house and your loved ones. Even when you are far away from home, you can always keep an eye on the house.
However, simple monitoring cameras can do the same thing but are not as convenient as the smart cameras offered by companies like Wyze.
Through Wyze smart camera, you can easily view the whole live feed of the house through your smartphone!
Whenever you want to, you can instantly open Wyze app on your phone and request live footage of the house.
How To Fix Wyze Cam Solid Yellow Light?
Wyze cam owners have been facing an issue where the cams will suddenly stop working. On further inspection, these users found out that the Wyze cam was giving a solid yellow light.
The problem is that they didn’t have any idea of what the yellow light represented.
There isn’t a specific meaning to what the yellow light represents. However, there are a number of fixes that can be tried in order to resolve it.
This is why today; we will be listing a number of ways how you can fix this:
- Factory Reset the Camera
If you are facing this issue, then the first thing we suggest you try is to factory reset the device.
Doing so should help delete all the stored settings inside the camera. In order to factory reset, simply hold the setup button for 20-30 seconds.
- Reflash the Firmware in the Camera
A few users have managed to fix the solid yellow light by flashing firmware in the camera. Flashing firmware inside the camera will require you to have access to a Micro SD card.
You can easily find the firmware along with the procedure of flashing it in the camera through Wyze official thread or forum.
Power cycling the camera is one of the best troubleshooting methods when you don’t want to go through the hassle of resetting the smart system.
It might take a bit of your time, but the procedure is daily simple. You just have to remove the power from the camera for around 15 minutes.
Make sure that all the power connections are isolated and that the camera has no access to the power.
If the problem is programming related and there are no hardware problems, then the issue will be fixed as soon as you turn on the camera.
Once the 15 minutes have passed, turn on the camera for a few moments. Wait for the camera to connect to your home network, and then check the response from the smart device.
Ideally, you won’t have to deal with the same solid yellow light, and you will be able to access the Wyze camera.
- Make Sure Power Supply Is Optimal
The power supply might also be to blame here. If you can’t seem to find the errors even after trying out all of these fixes, then there is no harm in checking the voltage output.
All your focus should be on isolating the voltage output from the outlet.
This is especially true for users that don’t give any attention to the maintenance of their electrical connections.
So, if you’re in the same boat with the electrical connections, just rely on any voltage measuring tool like a voltmeter or a multimeter.
Your main focus here should be on making sure that the power supply is optimal and matches the requirements of the camera.
However, if you didn’t get the required voltage from the unit, just fix the problem by hiring an expert.
You shouldn’t try to fix the electrical connections yourself. There is a good chance that you will electrocute yourself while trying to fix these connections.
So, don’t take that chance and try to spare some budget for these experts.
They will make sure that you don’t have to worry about a thing for the next few months. It is always a good idea to have the electrical connections checked once every year.
However, the safer thing to do is to have them maintained once every six months.
- Check For Hardware Issues
Hardware issues with the Wyze camera might also play into the same situation with the yellow light.
If you’re sure that there is nothing wrong with the power, then your camera might be damaged. You need to check every corner and section for cracks.
If you do find some cracks on the unit, then call the dealer right away. There is a possibility that the camera got damaged during delivery.
There is no debate that the delivery process can be a bit hard on smart devices. So, you will have to find the exact problem behind the camera’s yellow light.
If the issue is traced back to the damage caused by the delivery, then you need to grab a fresh replacement.
You are not responsible for any hardware damage and need official support to get through performance errors. Explaining this issue to the dealer would be enough in most situations.
He will take a while to verify your purchase, and you will have a fresh unit within one or two business days after verification.
From there, you can set up the new unit and won’t have to deal with any performance errors with the new device.
- Move The Router Closer To The Camera
The problem might be as simple as the router being out of range, and you need to move it closer to the camera to isolate the problem.
It might take one or more moments, but you’re not left with many choices here.
Improving signal strength is never bad for the smart system. This is especially true if your router has an effective range of 20 ft.
Staying below this range is usually the best option, and you need to make sure that there are no thick walls between the devices.
All of your focus should be on finding a spot that is in the direct line of sight of the smart devices. From there, you can refresh the router connection with a quick reboot.
Ideally, you will be able to secure a safe connection at this stage.
- Limit Interferences From Other Wireless Devices
The interference from other wireless devices might also be to blame here. Your focus should be on turning off or removing these devices for a brief period.
From there, you can power cycle both the router and the Wyze camera.
After the device powers back up, connect the camera to the router and then check the response from the yellow solid light.
If you’re not dealing with the same error, you can turn on all of the other devices.
However, if the issue presents itself again as soon as you turn on the smart device, then switch over to a different router.
Your current router can’t support all the smart devices, and you need to find an extension.
- Ensure That You Are Using a 2.4GHz Wi-Fi Network
In case you are using a 5GHz Wi-Fi network, you may need to swap. The reason is simply because 2.4GHz is much more reliable and does not cause issues compared to the others.
In order to change to 2.4GHz, access your router’s Wi-Fi settings. After you have successfully changed it, ensure to save the settings and reboot your router in order for this to take effect.
- Contact Customer Support
If none of the above steps seem to work for you, then you may have a faulty or broken unit. This is why you should contact the support team.
If your device is still under warranty, you should be able to quickly get a replacement unit.
The Bottom Line
Is your Wyze Cam showing a solid yellow light? We highly encourage you to follow the steps along with the mentioned instructions in this article.
Usually, the fix is pretty simple, but you will have to claim the warranty and get a fresh piece when the device is not responding after all of these fixes.
This is especially true for hardware problems with the unit. The Wyze support is pretty decent and won’t let you down when you point out a hardware issue.
They will help you secure a fresh piece in no time. From there, you can test out the performance of the new unit.
If your claim is valid, you will be able to secure a fresh unit in no time. Hopefully, you won’t have to ever worry about the same errors with the new Wyze camera.