8 Ways To Fix Wyze Base Station Flashing Blue

Wyze has always been one of the more dominant players in the market, with amazing smart features and controls.

You will not find any option that can even come close to the value maintained by this brand. So, be sure to keep that in mind as you try to find the right fit for your home.

The LED indicators on your base station will help you keep track of the functionality of the base station.

In optimal conditions, the light on your base station should be solid blue. That will show that the system is powering up and will engage with the existing setup.

This light status indicates that the base station is connected to your network, and you can access the security devices freely. However, if the LED light is flashing, then your base station is likely running into connection problems.

Usually, the Wyze base Station blue flashing indicator turns off a few seconds after the device powers up.

However, if the blue light keeps flashing on your base station and it is not connecting to the home network, try the following solutions.

Fixing Wyze Base Station Flashing Blue

1. Change Ethernet Cable

If your base station is in perfect shape, then the first thing you should do is change the ethernet cable. Several owners have pointed out that the issue with the base station flashing is mostly related to a defective ethernet cable.

For this reason, it is just better to test your luck by changing the cable, and there is a good chance that the Wyze Base station will connect to the router.

Inspecting the status of the ethernet cable will further give you a complete idea of the situation. If the cable seems to be damaged or kinked in a weird way, the only thing you can do is change the cable.

2. Check App Configurations 

Sometimes, the unit is just in travel mode, which is why you can’t seem to get rid of the flashing blue light.

There is no need to get worried about this mode as it is only meant to hibernate the unit, and it will be in perfectly good condition. So, you should not get alarmed.

The best thing that you can do here is to turn off the mode and then sync the setting through the base station.

It will take a few moments as the new configurations are synced through the application. However, you will also notice that the flashing blue light will come to a stop, and it will connect.

So, if the unit was working perfectly up to this stage, then you just have to check on the configuration issues. You might also have to create a new access point in some cases. However, that can vary from user to user. 

You can also seek help from other professionals on the online forums if you can’t seem to figure out the issue here. Just create a new thread with a detailed description of the issue.

These experts will make sure that you will not have to bother with more snags down the road.

3. Try using A Different Router

You will also get a better idea of the situation by trying out a different router. It will help you figure out whether the issue is with the router or with your specific unit.

So, you can rely on a different device to help you along the troubleshooting journey.

If the issue does get fixed with the new router, then you will know for sure that the current router is to blame here.

However, if the issue persists, then the base station will be to blame here, and you will have to look at a few more troubleshooting methods to isolate the issue.

It all comes down to how you’re planning on addressing the condition of the base station. A reset or a replacement is not that bad of an idea in most cases.

So, be sure to involve the dealer, and you might just get lucky with the warranty claim. 

4. Use A Different Port

Usually, the port on your router can also be the cause of this issue. So, you should first clean out the debris from the port and then try your luck with the base station again.

If it does not connect, then try a different port. It is not that rare for people to deal with defective ports on their routers.

For this reason, changing the port should be your next move if the base station doesn’t connect and the LED indicator is still flashing blue.

5. Check Port Settings

It is possible that the port configurations on your router are messed up. If you’ve changed the proxy configurations on your router, then that can be a cause of the Wyze base station flashing blue light.

So, you need to check the port settings and get everything back to default settings. Otherwise, you won’t be able to fix the issue even if you change the cable attached to the router.

6. Power Cycle Base Station

Power cycling the base station should be your next step if the problem with the Wyze station flashing blue light is not fixed at this point.

Minor bugs in the station can sometimes cause this problem, and resetting the power connection to the router should help eliminate this issue.

So, if you have not power cycled the router, just remove the power source for around 60 seconds.

Once a minute has passed, you can streamline the power connections, and that will help you get the base station in working order.

Ideally, the base station will boot up, and the blue light will stop flashing after 10 or 20 seconds.

7. Reset Router

Resetting the router might not seem like a smart choice, but you don’t have many options left if none of the fixes above helped you with the blue light.

Keep in mind that resetting the router will remove all the smart devices connected to the network, and you will have to start everything from scratch again.

For this reason, you need to test your luck with all the methods mentioned above. Otherwise, you will spend hours pairing all the devices when the issue could be fixed by changing the port on your router.

8. Create A Support Ticket

Creating a support ticket can also help you secure a replacement unit. The community forum is filled with reports on defective base stations where the unit will not connect to the router, even if everything is in perfect order.

The only fix in this situation is to get a replacement base station for your home. The warranty policy on these devices is pretty great, and all you need to do is to call customer support.

They will provide you with a replacement, and you can connect it to your router pretty easily.

Hopefully, all of the issues will be addressed right here, and you will not have to deal with more errors down the road. So, be sure to follow through with all of these methods, and that will be it when it comes to the flashing light on the base station. 

Wrapping Up

Most of the time, the situation with the Wyze base station flashing blue will be fixed as soon as you adjust the ethernet cable and fix the port.

That will most likely be it, as you’re trying to get the system working again. Almost all of the time, the route is to blame for these issues, and you should try to fix that.

However, if you’re confident that the router is not to blame here, then there might be programming errors with the unit itself.

Sadly, it can be a bit hard to isolate and fix these errors at first. So, you will have to go through a few methods here and there to power cycle and reset the station.

A quick reset will wipe away all of the configurations. However, you’re not left with many options at this stage.

So, be sure to proceed with reset when you can’t seem to figure out the situation with the base station. Hopefully, you will not have to bother with more fixes after that.

Lastly, submitting a support ticket on the official forums will help you secure a fresh piece from the dealer.

If the issue is genuine with the system and you’re not to blame, the warranty claim should be enough to help you with a new system. For this reason, you should always involve the dealer.