Wansview NCB541W is a popular camera used by many people. This camera is known for its good quality and easy-to-use features. However, some users have reported that they are unable to find their camera when they perform a search in their computer’s Start menu. This can be very frustrating, especially if you need to use your camera urgently. If you’re experiencing this problem, don’t worry – there are a few things you can do to troubleshoot and fix it.
Fixing Wansview NCB541W Not Found By Camera Search
- Check Router Settings
If you use a wireless connection, check that your router is properly configured and the camera is within range. How to check router settings will vary depending on your router model, but you can typically find this information in the router’s user manual or by contacting the manufacturer.
However, if you’re using a wired connection, check that the Ethernet cable is plugged in properly and that the camera receives power. If you are using a Power over Ethernet (PoE) connection, ensure that the PoE injector or switch is properly configured and that the camera receives power.
- Verify Camera IP Address
Once you have verified that your router and camera are properly configured, you can check the camera’s IP address to make sure it is on the same network as your computer. Most IP cameras will have a web interface you can access in a web browser. The camera’s IP address can usually be found in the network settings.
If you cannot access the camera’s web interface or do not know the camera’s IP address, you can use a tool like Advanced IP Scanner to scan your network for devices. Once the IP address is sorted, you can enter it into your web browser to access the camera’s web interface. If the camera’s web interface is still inaccessible, you may need to factory reset the camera and start the configuration process again. Consult the camera’s user manual for instructions on how to do this.
- Connect Camera Properly
Make sure that the camera is properly connected to your computer via USB. If the camera connection is loose, it may be the reason why your computer is not recognizing the camera.
- Restart Computer
Consider restarting both your computer and the camera. A restart will often reset the connection and allow the camera to be found by your computer.
- Update Drivers
Don’t forget to update your driver. If you find updated drivers available for your camera, install them. If there are, install them and see if that fixes the issue. This is how you update drivers on a Windows computer:
- Open Device Manager.
- Click the View menu and select Show hidden devices.
- Expand the Imaging devices section.
- Right-click your Wansview NCB541W camera and select Update Driver Software.
- Select Search automatically for updated driver software.
- Reinstall Wansview NCB541W
Fourth, try uninstalling and reinstalling the Wansview NCB541W camera drivers on your computer. This may fix any errors that prevent the camera from being recognized. To reinstall Wansview NCB541W drivers on a Windows computer, follow the following steps.
- Open Device Manager.
- Double-click Imaging devices to expand the section.
- Right-click your Wansview NCB541W camera and select Uninstall.
- Tick the box next to Delete the driver software and click Uninstall.
- Restart your computer.
- Reattach your Wansview NCB541W camera to the computer.
Check if your computer now recognizes the Wansview NCB541W.
If there’s still trouble connecting your Wansview NCB541W camera to your computer, contact Wansview customer support for further assistance.
- Get a Replacement
Finally, if neither of these solutions works, it is possible that your Wansview NCB541W camera is defective and will need to be replaced. To get a replacement, you can contact Wansview customer support or return the camera to the store where it was purchased.
We hope this article helped you troubleshoot your Wansview NCB541W camera issue. If you have any other questions, feel free to comment below, and we will try our best to help you.
Contact Official Helpline:
If the problem persists, you should contact the official Wansview support team for assistance. A representative from their customer care department will get in touch with you. Make sure to elaborate on the issue you’re facing in detail. The company may be able to provide additional suggestions.