Wansview cameras are designed for indoor and outdoor use and come equipped with night vision. These cameras are among the market’s most popular night vision security cameras. One common issue you may run into is that your Wansview camera night vision is not working. This can be frustrating, but there are a few troubleshooting tips you can try to get your camera up and running again. If you’re having trouble getting your Wansview camera’s night vision to work, don’t worry – you’re not alone. Many users have reported this issue, and fortunately, there are a few things you can do to troubleshoot and fix it.
- First, check to ensure that your camera’s night vision switch is turned on.
- Next, check if obstructions are blocking the camera’s night vision sensor.
- The camera should be positioned at an accurate angle so that nothing obstructs the sensor’s view.
- Consider Reducing the distance between the camera and the object you’re trying to view.
- Turn off any bright lights that may be interfering with the night vision.
- Finally, check the camera’s settings to ensure the infrared sensor is turned on.
Let’s discuss all of these troubleshooting tips in detail
Wansview Camera Night Vision Not Working Fix:
- Turn On Night Vision Settings
Make sure that the night vision switch on your camera is turned on. This switch is usually located near the lens and may be labeled “IR” for infrared. If this switch is off, the camera will not be able to see in the dark.
- Remove Obstructions
Next, check if obstructions are blocking the camera’s night vision sensor. This sensor is located just below the lens and needs a clear view to work properly. If there are any obstructions, try moving the camera to a different location.
- Position Camera Correctly
The camera must be positioned correctly. The infrared sensor on the camera needs a clear line of sight to work properly. Any obstructions between the sensor and the area you’re trying to view could be why the night vision isn’t working.
- Reduce the Distance Between the Camera and the Object
Another thing to check is the distance between the camera and the object you’re trying to view. The infrared sensor on the camera has a limited range, so if the object is too far away, the night vision won’t work. The sensor has a limited capacity, so the image will be too dark to see if you’re too far away.
- Turn Off any Bright Lights.
If there are any bright lights near the camera, that could also be interfering with the night vision. The infrared sensor is sensitive to light, so if there’s a bright light nearby, it could be causing the night vision not to work properly. Try turning off any bright lights near the camera and see if that makes a difference. Bright objects reflect infrared light, so if there’s a light source near the camera, it could be reflecting off of that and causing the night vision not to work properly.
- Check the Camera Settings
Finally, make sure that the camera’s settings are configured correctly for night vision. There should be a setting on the camera that allows you to turn on or off the infrared sensor. If that setting is turned off, the camera will not be able to see in the dark.
- Make sure the Camera is Clean.
Finally, ensure that the camera’s infrared LEDs are clean and unobstructed. If they’re dirty or covered, they won’t be able to emit the Infrared light needed for night vision.
- Contact Customer Care
Once you’ve taken these steps, your Wansview camera’s night vision should start working properly. If it doesn’t, you may need to contact customer support for further assistance.
If you’ve tried all these troubleshooting steps and still have trouble with your Wansview camera’s night vision, you may need to replace the camera. The night vision sensor itself may be defective if you’re still having trouble. You can try contacting Wansview customer support to see if they can send you a replacement. Sometimes, a hardware glitch goes undetected and leads to this issue. If that’s the case with your camera, you might need a replacement, but we hope these tips help you fix it.