While you have the option of using a soldering tool to connect multiple Vibe LED light strips together, it is a much better option to go with a connector when you’re adding new sections. Soldering can be a bit complicated, and there is a chance that you will end up damaging the light strips. So, you should always work with connectors while linking multiple Vibe LED light strips.
These strips are pretty consistent as long as you’re installing them properly. Even though there have been a few reports on Vibe LED light strips not working, you won’t have to worry about extensive issues with these options. So, here are some solutions that can help you deal with Vibe LED light strips not working.
Fixing Vibe LED Light Strip Not Working:
- Check Power Connections
Just like the majority of other lighting solutions in the market, you need to start the inspection with the power connections. A common problem with the Vibe LED lights is that these strips won’t turn on until you connect the front end properly to the power piece. Changing the orientation of the power piece and connecting the strip backwards will only create complications, and the lights won’t come on.
So, you should go over the instructions mentioned in the owner’s manual and try to fix the light strips with the power piece properly. This will eliminate the issue in most situations, and you won’t have to spend any time on more solutions.
- Remove the Plastic Cover from the Remote
The next thing you need to check is the cover on the battery of your remote. The remote doesn’t work until the plastic cover is removed from the battery section. This plastic cover is intended to preserve the battery until the remote is used by the owners. So, after receiving the package and installing the Vibe LED light strip in your house, remove the plastic cover and then try using the remote. It will only take a second, and you will get the desired response from these LED lights.
- Change Connectors
The condition of the connectors also plays a huge role in determining the performance of Vibe LED light strips. While these LED light strips are pretty efficient and affordable, they lack a bit when it comes to durability. So, you should thoroughly inspect the condition of the connectors and replace the connectors if they are damaged. You can’t do much when it comes to fixing a defective connector, and contacting the experts is your only bet in this situation.
- Replace Damaged Light Strip Sections
Replacing damaged light strips might seem like a complicated fix, but if you’re somewhat experienced with a soldering tool, it won’t take you more than a minute. On the other hand, if the purchase was recent, and you get the damaged LED strips out of the box, then the only fix here is to replace the damaged sections. There isn’t much that you can do about these damaged sections, and calling the dealer is the only solution. So, you should either engage the dealer and try to get a replacement or try your luck with fixing the sections with a soldering tool.
- Use A Different Port
Some users have also pointed out that a defective port can have an impact on the Vibe LED light strip not working. So, if you’re not able to get the device working after plugging it into the port, then you should use a different device to power up the lights. A defective port is not that rare, and there is a decent chance that you’re struggling with the same issue. For this reason, you should try to plug the power piece into a different port and then try turning the lights on.
- Keep the Lights Connected with the Power Piece
Lastly, customers have reported that you need to keep the lights connected to the port for around 55 minutes before you can use them with the remote. Many users assume that the lights are defective when they don’t turn on immediately after connection with the power piece. Even though these instructions are not specifically mentioned in the manual, you should wait for around an hour before trying to use the lights. On the other hand, if you’ve waited for over an hour and the lights are not responding, then call the customer support department and explain this situation to the professionals.