Even though there are many brands that claim innovative features and better integration options, you won’t find many options that prioritize energy efficiency in your home.
People don’t consider the impact of some of these energy-saving devices on their final electricity bill and only look at the immediate price they will be paying for these products.
For this reason, Tricklestar has established itself as the perfect option when it comes to providing the perfect balance between price points and energy efficiency.
You’ll be able to stick to a minimal budget with this item, and the impact on the electricity bill will also be minimal.
The recent complaints on Tricklestar power strip switched outlets not working have annoyed some anglers. While these issues are somewhat rare, you can still rely on these troubleshooting methods to fix the outlets.
Fixing Tricklestar Power Strip Switched Outlets Not Working:
- Fix Levels
The configuration on the outlet is one of the primary factors why you might be running into problems with the Tricklestar power strip switched outlets not working.
Ideally, cycling through different power options on the device should be enough to get the system working again.
Most users have pointed out that switching the power settings to minimum or medium should streamline the power flow. So, if you’re on high power, set the device to low and test the unit again.
Ideally, the issue will be fixed right here, and you won’t have to deal with more errors. This is especially true if you’ve not maintained the electrical connections in a while.
Hiring an expert might be the only reasonable solution here if you’re planning on eliminating this issue permanently.
- Check Power Requirement
While these outlets are designed to preserve energy by limiting the power flow, if the connected devices are too power efficient, then the outlet won’t provide any power to the device.
You can test the power requirements by either turning up the device power to max or by going through the owner’s manual.
After that, match the minimum power requirements with the lowest configurations on the outlet to get a better idea of the situation.
- Turn On Connected Devices
The devices connected to this outlet only work when you’re using the system. If the device is not turned on, then there won’t be any power on the system.
So, if your outlet is not working, the best thing you can do is connect something that will be turned on at all times.
That way, the outlet will keep supplying the power and won’t limit the flow when the most demanding device is turned off.
- Check Source
The next thing you need to do is check the source of the power. Sometimes, the issue is not with the outlet, and you’re just struggling with the power flow from the source.
So, make sure to use a multimeter and check the power output from the main source.
- Find A Cooler Spot for The Strip
The problem here might just be with the cooling status of the strip. You will have to get through overheating problems to isolate this issue. There is no debate that heating problems are never good for the machine.
So, if you’re in the same boat with a power strip, it is best to find a cooler spot.
Usually, going with a shaded region or improving the ventilation will do the trick. You will also be able to limit the fire hazards by providing the power strip with good ventilation.
So, if your strip won’t work and you can’t find any frayed sections on it, try to change the position.
From there, make sure that the temperature of the strip doesn’t get too hot for your touch. So, go through the installation procedure one more time. You won’t have to worry about a thing after that.
- Make Sure There Are No Frayed Sections
The presence of frayed sections is never good for the unit. You will have to make sure that the power strip is in good shape from top to bottom. There should be no entangled sections, dents, or frayed sections.
Sadly, it is not too rare for the power strip to get damaged during delivery. Furthermore, the installation can be a bit rough sometimes.
So, you will have to thoroughly check the power strip. That will help you isolate these errors, and you can either claim a replacement or fix the damage yourself.
Usually, owners complain about this issue when the power strip is installed close to a sharp object.
You won’t be able to get long-term performance from this unit if the installation conditions are similar for your power strip as well. So, try finding a good spot for your strip away from rough edges.
On the other hand, if the strip is already damaged, you need to rely on official support. You should either take your unit to a repair center or claim the warranty immediately.
If the warranty is valid, you won’t have to spend a penny to get a new one.
However, if the warranty has expired, you will have to extend your budget and hire a local expert.
He will solder up the device and patch up the rough sections immediately. From there, it won’t be too difficult to address these problems.
- Try Reducing The Load
At this stage, you might also have to check the load on the power strip. While this strip can support an amazing level of load pretty easily, you should still focus on limiting the load.
It can handle a great load, but the environmental conditions should be managed accordingly.
So, if the conditions are not that suitable for your device, then reduce the load on the strip. Hopefully, you won’t have to bother with any more problems after reducing the load.
- Check For Water Damage
This strip doesn’t hold up well against water damage. While the marketing campaign behind his trip makes it one of the ideal options for most users, you still need to be careful regarding the water damage.
If water or any liquid made its way into the strip, make sure to put it in sunlight for four hours.
That should be enough to help you get rid of the water inside the strip. However, if the strip remains submerged for a few minutes, you will have to get a new one.
It all comes down to the current condition of the power strip.
So, judge the performance accordingly and then leave the unit out to dry. You might electrocute yourself if you try to use this strip. Hopefully, you won’t have to bother with any more errors.
- Make Sure Voltage Supply Is Optimal
You will have to check the voltage supply from the main source as well. The power strip is not to blame for every issue.
Instead, you have to check the power supply from the source. It should be enough to help you get a better understanding of the issue.
If the voltage output is abnormal or the response is not optimal, you can’t expect any performance from the power strip.
Here, you can also try relying on a different outlet to fix the issue. That would mostly be enough to isolate these errors.
When the problem gets fixed by changing the outlet, you will know for sure that the electrical connections are to blame here. So, find a local contractor and have him help you through a fix.
Usually, paying a minimal hiring fee will be enough to address these errors.
You shouldn’t try to service or fix the electrical connections yourself. There is a huge risk that you will electrocute yourself.
So, to limit these errors, just spend some bucks on a professional. He will guide you accordingly through the issue.
- Fix Cable
Lastly, the cable connected to your outlet can lead to similar problems. All you need to do is carefully inspect all the sections for frayed and damaged sections.
Similarly, if the cable is kinked, you should look towards engaging the dealer for a replacement.
There is a good chance that the cable is damaged, and you shouldn’t try to change the cable yourself.
This issue will be covered by the warranty, and as long as you have a valid warranty, it shouldn’t be that much of a problem to secure a replacement.
Wrapping Up
These were a few pointers that you need to keep in mind when the unit is not responding to any input. Most of the time, the issue is related to hardware problems with the unit.
However, if your unit is in good shape, try to limit the problem to ventilation issues and overheating problems.
If the issue is not fixed by following these methods, then you’ll know for sure that your device is defective.
In that condition, the only real fix is to claim the warranty. You’re not liable for any damages and will have to get the dealer’s support for a fresh replacement.