Setting up new smart lights in your home might not be the easiest solution for your smart home. Many users struggle with pairing the devices and going through the initial configurations. So, it is not that rare to see customers complaining about the TreatLife Bulb not blinking for the pairing process.
The flashing of the bulb indicates that your smart device is in pairing mode, and it can be pretty annoying when you can’t get the bulb in pairing mode. In this situation, you need to reset the bulb and check the power connection to the unit to isolate the issue.
So, if you’re also dealing with similar problems and the TreatLife Bulb is not blinking, then the following solutions would help.
How To Resolve TreatLife Bulb Not Blinking
- Check Connection With The Application
The connection of the TreatLife Bulb with the smart application is the first thing you need to consider when the bulb is not blinking. This bulb will only blink when it is in pairing mode, and sometimes owners get confused when the bulb stops blinking after connecting with the application.
So, you should also check the bulb from the smart application and then remove the bulb from the smart app before trying to access the pairing mode again. Otherwise, the TreatLife Bulb will stop blinking, and you won’t have access to any smart features.
- Reset TreatLife Bulb
Resetting the TreatLife Bulb is the best possible method of removing stored configurations from the unit. Once the reset is complete, you can try to connect your TreatLife bulb with the power source and then activate the pairing mode.
Hopefully, this time around, the bulb will start blinking if there are no hardware-related issues with the unit and the bulb is in good shape.
- Check Voltage
If the voltage requirements of the bulb are not met, then the bulb won’t respond to the pairing mode. So, even if the bulb is new, you need to check the power output from the fixture through a multimeter. If the voltage output is not optimal, then the only thing you can do is to find a different power source for your outlet.
This will fix the voltage issues, and the TreatLife bulb will start blinking once the voltage supply to the unit is optimal. So, just check the voltage and try using the unit again.
- Clean Fixture
The fixture connected to the TreatLife bulb is the next thing that you should consider when the unit is not blinking. If the fixture is damaged or contains excessive debris between the connection points, then cleaning the unit is the only real solution. Otherwise, the power flow will be interrupted, and the bulb won’t start blinking.
So, the only thing you can do here is to clean the fixture thoroughly and then connect it with the bulb again. Make sure to remove the power connections before cleaning the fixture to avoid safety hazards.
- Use A Different Switch
Sometimes owners connect the smart bulb with the dimmer switch and then struggle with the TreatLife system not blinking. This bulb doesn’t pair well with a dimmer switch, and you need to find another spot for your smart device. Connecting the TreatLife bulb with a dimmer will only create problems with the smart features, and you will often run into pairing issues.
So, you should find a traditional switch to pair up with the TreatLife bulb. Make sure that the power flow to the bulb is not restricted by any dimmer and that the unit has optimal energy flow at all times.
- Get A Replacement
Lastly, if there is no response from the smart bulb at this stage, then you need to get a replacement. You’re likely dealing with a defective bulb that doesn’t bring any performance to your smart system. So, make sure to reach out to the dealer immediately and ask for a replacement. The warranty policy on these bulbs will cover all programming-related issues, and you can get a fresh piece for free.
All in all, these were some of the troubleshooting steps to help with TreatLife Bulb Not Blinking. Ideally, checking the connection and resetting the TreatLife Bulb will be enough to fix the issue, but make sure to check the output for voltage-related problems to isolate the issue.