While Sylvania is an affordable option in the market, there is a huge question mark on this brand when it comes to performance consistency. Issues like Sylvania Christmas half lights not working are pretty common, with customers complaining about the issue every day.
Usually, these problems are related to the installation of the lights and can be fixed easily. So, if you’re also in this situation, there is a good chance that you’ll be able to fix the Sylvania Christmas lights yourself. You won’t have to spend much time troubleshooting this issue, and the following solutions should help you with this problem.
Solutions For Sylvania Christmas Lights Half Not Working
- Check For A Broken Bulb
If you’re sure that only half the lights are not working, then there is a chance that you’re dealing with a broken bulb in the string. So, you will have to inspect the whole strand thoroughly and find the first bulb that is not lighting up. If this bulb is actually damaged, then you will have to replace this bulb and install a compatible replacement to get the whole strand working again. Otherwise, half the lights will remain off when you supply power to the string.
- Tighten Up Bulb Connections
Sometimes, you’ll just be dealing with a loose connection, and wiggling the string would light up the whole strand. If you’re in this situation, then you will have to manually tighten up all the bulbs and then check the response from the strand. Make sure to remove the power before tightening up the bulbs, and provide power again once the bulbs are tightened up. This will eliminate the problem with Sylvania Christmas lights half not working.
- Check For Voltage Issues
Voltage problems also have a role to play in this situation where half the strand will light up properly, and the other half will either be flickering or will have minimal light. This directly points towards low voltage, and you need to rely on a voltage measuring unit to judge the output from the outlet. There is a chance that the outlet is defective, and you need to find a different outlet for your Christmas lights.
- Fix Frayed Wiring Sections
Frayed wiring sections also impact the performance of Sylvania Christmas lights. So, if you’re sure that the bulbs are not damaged and tightened up properly in their location, then you need to fix the wiring sections. If the condition of the strand is too poor, then replacing the wiring might be the only fix to get the bulbs working again.
- Call Sylvania Customer Support Department
Lastly, if the purchase was recent and the wiring is in perfect condition, then you might be dealing with a defective strand. There is no need to try and fix this issue yourself, and your first move should be to call the professionals working at Sylvania customer support. Inform them about this issue with the Christmas lights, and then demand a replacement. If the claim is valid, you will get a new set of lights in no time.