A motion sensor is one of the many monitoring devices that can be used for additional security. The job of a motion sensor is to detect any kind of unusual movement which then sets off an alarm to let you know. It is useful in particular in order to avoid theft and similar threats inside a house.
How to Fix Skybell Motion Sensor Not Working?
Quite a number of users have been complaining about facing an issue with their motion sensor. Their motion sensors won’t go off no matter what they do. For some of them, the motion sensor is not even responding.
This is why today; we will be taking a look at this issue in detail. We will be listing a number of troubleshooting steps that should all help in resolving the problem. Here are all of them mentioned down below:
- Ensure that You Are Using the Correct Wi-Fi Setup
It could be that you are currently using an incorrect Wi-Fi setup. If that is the case, then you will need to access your router settings. Once you are on the router settings webpage, you will have to go under the Wi-Fi tab.
Here, you will need to check what Wi-Fi band you are using. In most cases, users have the 5GHz Wi-Fi band selected. However, it is recommended that you use the 2.4GHz Wi-Fi band as the prior is not fully supported. You will also need to check whether your internet is completely working or not.
- Try Resyncing Your Device
Another thing that you can do in order to solve the problem is to try and resync your device. But before you attempt to resyncing the device, you will first have to charge your device for at least 10-15 minutes. This is done to ensure that the device does not turn off during the syncing process.
Also, we recommend that you log out of your app and then sign before you try resyncing the device. Furthermore, you should make sure that your device is indeed connected to the internet.
- Contact Support Team
If both the above-mentioned steps don’t seem to work, then what you can do is to try and contact your support team. Doing so will allow a professional to take a look at your matter. After learning of your issue, he should give you a number of troubleshooting steps that should ultimately lead to you fixing your device.
In case of a faulty device, he should also help you get it replaced.
The Bottom Line
Here are the 3 different ways on how you can easily fix the Skybell motion sensor not working. In case you found anything confusing with the article, be sure to leave down a comment.