6 Fixes For Shark Robot Side Brush Not Spinning

The performance of every cleaning robot is directly related to its maintenance, and even reliable devices like Shark Robot can often malfunction when you’re not keeping track of their servicing requirements. So, you need to make sure that the bottom of the robot is free of hair and that the dust bin is regularly cleaned. Otherwise, you’ll keep running into complications with the Shark Robot side brush not spinning properly.

Shark Robot Side Brush Not Spinning

Depending upon the severity of the issue, it can be fairly simple to get the side brushes spinning again. So, if you’re in the same boat and the side brushes are not responding, just try some of these solutions.

1. Get Rid Of The Hair

The side brush will stop spinning after too much hair gets entangled beneath the unit. It is a pretty common issue and can often be linked with ignored maintenance of the unit. So, if you’ve not serviced the unit in a while, the first thing you need to do is to get rid of the hair.

Make sure that debris is not stuck behind the brushes, and then try turning on the Shark robot one more time. If there are no issues with the motor itself, the brush should start spinning at this point.

2. Use WD40

At this point, you need to make use of some WD40 after removing the side brushes to get them spinning perfectly. You can also look for more debris after taking off the side brushes. That way, you’ll know for sure whether the issue is with the Shark robot motor or you’re just dealing with excessive debris behind the side brushes.

3. Check Shark Robot Motor

If the issue is not fixed at this stage, you’ll have to take apart the bottom of the robot and check the condition of the motor. Check for discolored parts around the motor for water damage, and then clean up the wiring connections. If the motor is indeed in rough condition, you won’t be able to do much about the side brushes not spinning.

However, if the motor is in good shape, just clean up the wiring a bit and fix loose connections. That should be enough to address power-related issues with the motor. Hopefully, you won’t have to call for a replacement, and the motor will start working perfectly in no time.

4. Fully Charge Your Cleaning Robot

Charging your cleaning robot is the next thing that you need to do when you’ve been using the Shark Robot for a few months. There is a chance that the batteries on your unit are drained out, and getting battery replacements is the only logical move here. You need to make sure that the battery replacement is compatible with your unit and then install it on your robot.

Once that is done, let the docking station charge up the robot completely. You won’t have to waste further time in the troubleshooting process, and the side brushes should start spinning again after the battery is functioning properly.

5. Reset Shark Robot To Factory Defaults

If the issue is relegated to the robot software and all the hardware components are in good shape, you need to reset the robot back to factory settings. That should address all programming bugs, and you’ll have to set up the system from scratch. So, set aside some time accordingly and then check the performance of the side brushes after the robot has reset. At this point, you’ll know for sure whether the unit is defective or the issue is related to the programming of your robot.

6. Get A Replacement

If the issue remains unfixed even after resetting the robot to factory settings, you’ll need to get a replacement from your Shark robot dealer. There is always a chance that the motor or the main control board is defective, which is why the brushes are not spinning. So, if you’re sure that there is no hair clogging up the unit, just ring up the dealer one time.

Explain this situation with the side brushes not spinning in the Shark robot, and he will guide you through relevant troubleshooting steps. If the robot is indeed damaged, then you can forward the warranty claim and get a new piece.