The Samsung Jet Bot has advanced features that allow it to clean your home quickly and efficiently. The first of these is the edge-detecting sensors. These sensors will enable the Jet Bot to detect edges and corners so that it can avoid them when cleaning. This makes the Jet Bot much more effective at cleaning than other robotic vacuum cleaners.
Another great feature of the Samsung Jet Bot is its self-emptying dustbin. The dustbin has a capacity of 0.5 liters, which is enough for up to two weeks. Jet is operated using Wi-Fi, and Jet Bot is compatible with Android and iOS operating systems.
You can control the Jet Bot using the Samsung Smart Things app. This app allows you to schedule cleaning times, set cleaning modes, and monitor the cleaning progress.
However, the Samsung Jet Bot sometimes does not connect with the Wi-Fi; if you’re facing a similar situation, here’s how you can fix it. If the Samsung Jet Bot is not connecting to Wi-Fi, there are several possible reasons; a few common reasons include:
-The Jet Bot is not in range of a Wi-Fi network
-There is a problem with the Wi-Fi network itself
-There is a problem with the Jet Bot’s Wi-Fi connection
Here’s how you can fix these issues.
Fixing Samsung Jet Bot Not Connecting to Wi-Fi:
- Keep Wi-Fi Router within Range
The Wi-Fi router may be out of range. Move the Samsung Jet Bot closer to the router to see if it will connect. Make sure you’re using Wi-Fi with 2.4 GHz band support. If the router has a 5GHz network, the Jet Bot will not be able to connect. Next, make sure the Jet is within range to ensure connectivity. Every router has a specific range; if a device falls out of range, it no longer responds to the internet.
- Check Password and SSID
Enter the correct password for your Wi-Fi network. Also, check to ensure you use the right SSID (Service Set Identifier). The SSID is the Wi-Fi network. Each router has a default SSID, but it’s possible to change it.
- Forget Wi-Fi Network and Reconnect
Consider forgetting the Wi-Fi network on your Jet Bot. Go to Settings -> Wireless & Networks -> Wi-Fi Settings. Find your network in the list and select “Forget.” Then, try reconnecting to the network.
- Update Jet Bot Firmware
If you’re still having trouble connecting, the firmware on your Jet Bot may be out of date. From Settings -> About Device -> Software Updates to check for updates.
- Restart Jet Bot and Router
If you’ve tried all the above and are still having trouble, try restarting your Jet Bot and router. This can often fix minor connectivity issues. To restart your Jet Bot, press and hold power. For most routers, you can unplug the power cord, wait a few seconds, and then plug it back in.
- Remove Obstructions
The signal may be blocked between the router and the Samsung Jet Bot. Remove any obstructions that may interfere with the signal.
- Factory Reset
If you still have trouble connecting the Samsung Jet Bot to Wi-Fi, you may need to factory reset the device. This will erase all data on the Jet Bot, so backup any important files before proceeding. To factory reset the Samsung Jet Bot, follow these steps:
- Press the power button, so the device turns off.
- Press and hold the reset button (located under the power button) for 10 seconds.
- Press the power button again to turn on the device.
- The device will now be reset to its factory settings.
To Sum It Up
There are several possible reasons why the Samsung Jet Bot is not connecting to Wi-Fi. The most common reason is that the router is out of range. Other possible causes include:
- A problem with the Wi-Fi network itself.
- A problem with the Jet Bot’s Wi-Fi connection.
- Obstruction between the router and the Jet Bot.
To fix these issues, try moving the Jet Bot closer to the router, checking the password and SSID, forgetting and reconnecting to the Wi-Fi network, updating the Jet Bot firmware, or restarting the Jet Bot or router. If these steps don’t work, you may need to factory reset the Samsung Jet Bot.