4 Ways To Fix Roomba Brush Not Spinning

Roomba is a great smart device that can be used in order to fully clean your house’s floor. It is a robotic vacuum that helps in cleaning all the different spots on your floor. It uses different techniques in order to clean your house.

How to Fix Roomba Not Spinning?

Quite a lot of users have been experiencing issues with their Roomba device. On asking such users about the issue, they mentioned how the brushes in their Roomba are not spinning at all. As a result, the device isn’t cleaning their house like it’s supposed to.

If you are also having the exact same issue, then we highly suggest that you keep on reading. In this article, we will be exploring all the different ways on how you can resolve the issue. So, without wasting any time further, let’s get started!

1. Run a Simple Maintenance on Your Roomba

One of the first things that you can do is to run maintenance on your Roomba device. In order to do this, you will have to follow the following instructions:

• First of all, make sure that your Roomba device is off.
• Proceed by placing a bit of debris directly in front of the Roomba. The debris can be small beads, cereal, or even a small piece of paper.
• Now, hold down the Clean button for around 3 seconds.
• Similarly, press the Clean button when it is over the debris as well.

After you are done, you will have to check the results. For instance, if your Roomba managed to pick the debris, then it could be that its performance is simply degraded. However, if it did not pick anything, then you will have to proceed and perform rubber care and retest.

2. Cleaning the Device

Over time, devices like your Roomba will get really dirty. When this happens, you will notice it not working like it is supposed to. In cases like these, you will have to thoroughly clean the device. Once all the dirt and debris are cleared out of the device, you should no longer be facing this issue.

If you have never cleaned your device, you will have to clean the bins as well as the filters of your Roomba. You can do this by simply removing the bin and filter from the device by pressing the dedicated button. Afterward, just throw all the dirt by simply shaking it. If you want to thoroughly clean it, you may also use a piece of cloth for cleaning the device. Always keep in mind that you will have to clean the device regularly for optimal performance.

3. Checking the Side Brush

If only the side brushes are not working, then you will have to check them. Try loosening it with the use of a screwdriver or a coin. After you remove the side brush, you will have to remove any dirt that may have accumulated. Check both the side brush and the module. Once you are done cleaning it, you can successfully reinstall it.

Even after cleaning the side brushes, if they are still not working, then you might have to completely replace the module with a newer one. It could be that the module has become faulty due to which you are now experiencing this issue.

4. Contact Customer Support

If none of the above-mentioned steps don’t seem to work, then what you can do is to contact customer support. Doing so will let a professional from the team deal with your matter. After asking you a bunch of questions, he should be able to suggest to you a number of ways on how you can troubleshoot this issue.

The Bottom Line

Here are the 4 different ways on how you can fix Roomba brush not spinning. In case if you didn’t understand anything, or have any questions at all, be sure to contact us through the comment section down below! We will be sure to get back to you as soon as possible.