The Ring Floodlight, although being a remarkable piece of technology, will still be susceptible to the same kinds of issues as other lights. The following is a list of seven frequent problems, as well as the answers to those problems. Ring Smart Light is available in a variety of products, one of which is the Ring Floodlight.
They are designed to interact with your Ring Security Network and provide supplemental illumination for your house and property in addition to their other functions. This establishment serves as a one-stop shop for all of your home’s lighting and security monitoring needs.
Ring Floodlight Not Connecting To Wi-Fi Troubleshooting
Let’s take a look at some of the most common problems and solutions associated with these powerful adjustable lights.
- Unplug the Router
Checking your Wi-Fi connection should be done before you immediately come to the conclusion that the camera is the source of the issue. Many people decide to do this test before going on to the next stage in their process since it only takes thirty seconds to complete. Unplugging your router, waiting thirty seconds, and then plugging it back in is the simplest way to fix the problem. Examine the camera to see whether or not the issue persists after the router has been rebooted and connected to the internet.
- Status of Camera
Make sure that your ring camera is not still connected to Wi-Fi or is only receiving a weak signal before proceeding anymore.
- To check whether your camera is connected, open the Ring app and follow these steps:
- Go to the Ring app on your smartphone or tablet that you’re using to control your camera.
- Choose the device that is causing you problems.
- Select “Device Health” from the drop-down menu.
- Determine if it says “offline” or whether it’s merely showing a lousy signal.
- There is no communication between your webcam and the rest of our instructions if it reads “offline.” If it’s just a lousy connection, move it closer to the router and see if it helps. It may be simply too far away.
- Check Battery Power
It’s possible that your Ring spotlight cam is switched off or that the batteries are dead. Check sure it is turned on and that the batteries are in excellent working order. If the problem is with the batteries, the solution is straightforward. Simply replace them and turn them back on. It should connect to your Wi-Fi automatically.
You may also restart your camera after replacing the internal battery. Internal battery failure might potentially cause connection issues.
- Outlet Check For Wireless Device
If your spotlight camera is connected, verify that the plug it is plugged into has power. Use another device or check the circuit breaker to see if it’s broken.
- Check your Wi-Fi
It is possible that your camera may need a new password for the Wi-Fi network in order to connect. When you change the password for your wireless network, all devices that were previously associated with the old password will attempt to reconnect using the new password as soon as you make the change.
- Setup Mode Camera
Maintain pressure on the setup button of your camera for a period of twenty seconds. It needs to restart in setup mode and then make an effort to re-join all by itself.
- Reset Your Camera
Try resetting the camera to its factory settings as a final resort. It’s essential to bear in mind that resetting your camera will restore all of the settings you’ve altered to their original state. In addition, you’ll have to go through the whole setup process once again.
Follow these two easy steps to reset your camera to its default settings:
- Take a few moments to make sure the camera is running before pressing the Reset button for 30 seconds.
- Release the button when the camera’s status light flashes. The flashing light just signifies that the device is rebooting. Holding the restart button for too long or too short a period of time will not cause it to flash. The first step should work if you repeat it.
There are no further requirements that must be met. It is of the utmost importance that the floodlight camera is reset to its initial settings. Now you need to hook up the camera to your computer and check to see whether it works.