Reolink Argus 2 Camera is a battery-powered security camera that can be placed indoors and outdoors. The Reolink Argus 2 is a weatherproof camera that can be used indoors or outdoors. The camera has night vision capabilities, providing clear footage even in low-light conditions. The camera has inbuilt motion detection, so it can send you alerts if it detects any movement in its field of view. The Reolink Argus 2 also comes with two-way audio, so you can communicate with whoever is in front of the camera. However, a few issues remain with this product, such as its short battery life and the lack of a memory card slot. But overall, the Reolink Argus 2 is a good security camera that can be used indoors and outdoors.
If you’re having trouble saving pictures with your Reolink Argus 2 camera, there are a few things you can try to troubleshoot the issue.
-Connect the Camera to Power Source
-Check Picture Settings
-Format SD Card
-Insert SD Card Properly
-Check Camera Firmware
-Reset the Camera.
Let’s see all these troubleshooting tips in detail
Reolink Argus 2 Camera Will Not Save Pictures Fix:
- Connect Camera to Power Source
The camera should be properly connected to a power source. If the camera is not connected to a power source, it will not be able to save pictures. How to make sure the camera is connected to a power source? There are two ways to check this.
Check if the power adapter is properly connected to the camera and plugged into a working outlet. Open the Reolink App, and then go to “Device Settings”> “General.” If the “Power Supply” shows “Offline,” the camera is not getting power.
- Check Picture Settings
Next, check the picture settings to ensure the camera is set to save pictures. To do this, open the camera’s menu and navigate to the “Picture” settings. In the “Picture” settings, make sure that the “Save Pictures” option is turned on. To do this, open the Reolink App and go to “Device Settings”> “Camera”. Make sure the “Resolution” is set to “1080P” and the “Frame Rate” is set to “25fps”. If these settings are not correct, the pictures will not be saved properly.
- Format SD Card
If you still have trouble saving pictures, try formatting the SD card. To format the SD card, open the camera’s menu and navigate to the “Storage” settings. In the “Storage” settings, select the “Format” option. To do this, insert the SD card into your computer and format it as FAT32. Once the SD card is formatted, insert it back into the camera and try taking a picture again.
- Insert SD Card Properly
Next, check the SD card that is inserted into the camera. Make sure that the SD card is properly formatted and that there is enough space on the card for the pictures you want to save. How do you know an SD card is inserted properly into your camera? You will see a green light on the camera next to the SD card slot if it’s properly inserted. If not, try removing and reinserting the SD card.
- Check Camera Firmware
Another thing you can try is updating the camera’s firmware. To do this:
- Open the camera’s menu and navigate to the “System” settings.
- In the “System” settings, select the “Firmware Update” option.
- Once the firmware is updated, try taking a picture again.
- Reset Camera
Finally, try resetting the camera if you still have trouble saving pictures. This can usually be done by pressing and holding the reset button on the camera for a few seconds. To reset the camera, open the camera’s menu and navigate to the “System” settings. In the “System” settings, select the “Reset” option. We’re confident that one of these troubleshooting tips will help you fix the issue with saving pictures on your Reolink Argus 2 camera.
Contact Customer Support
If you still have trouble after trying these steps, contact Reolink customer support for further assistance. Customer support is well equipped to help you troubleshoot any issues with your camera.
Reolink customer support can be reached by phone at 1-888-212-0751 or by email at [email protected]. You can also live chat with customer support through the Reolink website.