A pool light can be an elegant yet expensive addition to your smart home. It is true that there are some cheaper options available in the stores, but you should prioritize performance over pricing.
It can be quite annoying to replace the pool lights when they are not working perfectly.
Most of the time, it is a good idea to rely on local technicians to help you with the installation. You will not be able to fix these lights yourself if you’re inexperienced, and there is a good chance you’ll end up damaging the lighting.
This is especially true if you’re working with cheaper brands on the market.
So, make sure to go with reliable brands that ensure customers of consistent performance. There are many reports of the pool light remote control not working after the installation.
So, you might also run into the same errors when working with your current lighting system.
This issue is pretty disappointing for customers that spend hours setting up the lights. Luckily, you will just have to try a few basic fixes here and there to get through with the adjustment.
So, here are some possible troubleshooting methods that can fix the issue with the remote.
Solutions For Pool Light Remote Control Not Working
- Try Replacing the Battery
Replacing the battery on the remote control should be your first move when the pool lights are not responding.
There is a good chance that the issue is not with the lights but with the power supply to the remote control itself. So, you’ll have to figure out the situation accordingly.
According to the vast majority of customers, issues with the remote control are almost always linked to drained batteries.
So, if you’ve not changed the batteries in a long time, now is a good time to do so. The good thing here is that the replacement batteries will not cost you much.
All that you have to do is to spend a few bucks and then install the new batteries on the remote. From there, fixing the unit will come easily to you, and you will not have to deal with more errors.
Hopefully, that will be it when replacing the battery from the system.
Make sure to also check the condition of the battery connection points and clean all rust and dirt from the unit. Otherwise, the power flow won’t work perfectly, and the remote control will keep running into the same issue.
So, replace the batteries and clean the connection points.
It will not take up much of your time either, and fixing the unit will come easily to you. If you’re confused about the battery type or can’t seem to find a suitable replacement, be sure to engage the dealer, and he will make your life easier.
- Check for A Tripped Breaker
Another common reason why your lights won’t respond to the remote is a tripped breaker. It is not that rare for water to get on the switches connected to the pool lights and cause the breakers to trip.
So, you will have to first check the condition of the light switches and make sure that they are dry.
After drying out the switches, make sure to turn the power back from the breaker. This will get the remote working again, and the lights will respond perfectly to your controller.
With that said, we suggest that you reach out to local technicians when you can’t seem to figure out the issue. Getting help from the locals will make your life easier, and you will not have to worry about more errors down the road.
Trying to fix the power connections yourself can be dangerous, and you might end up electrocuting yourself. This is especially true if you don’t have much experience. So, be sure to reach out when you’re stuck in these errors.
- Power Cycle Your Pool Lights
Sometimes, programming-related bugs with the pool lights can also lead to similar situations where the remote control won’t work with the lights. So, you should try to remove power from the lights for a brief moment and then turn them on again.
This will just take a second, and you can use the circuit breaker to turn the power off. Make sure no external power source is connected to the batteries, and then check the performance of the controller again.
- Check Voltage Output from The Power Source
Issues with the power output from the source can also lead to situations where the remote won’t be able to control the pool lights. So, you should either call an electrician or use a multimeter to check the output from the outlet.
If the power output is not optimal, you will have to try a different outlet.
Make sure the voltage of your lights matches the requirements mentioned in the instruction manual. This will help you get the desired performance from your lights.
You can’t expect the device to work when the power going into the system is not optimal.
For this reason, you can rely on devices like a multimeter to check up on the power connections. If the power is not optimal, then you will have to get help from local experts.
You can’t fix the power connections yourself, and you will only be risking your safety.
You need to also make sure that the power connections are serviced once every six months. Otherwise, the issue will present itself frequently, and you will not be able to fix these errors on your own.
So, be sure to reach out and get help with these errors.
- Reset the Pool Lights To Factory Settings
Depending on the brand of pool lights you’re using in your smart home, resetting them to factory default can help you maneuver through responsiveness issues.
This is especially true if you’re sure that the hardware is not damaged and the issue is with the programming.
So, go through the instructions in the owner’s manual and reset the light to factory default. This will remove all the saved configurations, and then you can set up the controller with the smart lights one more time.
Hopefully, this will eliminate the problems with the pool light remote control not working, and you won’t have to bother with the same issue again. It all comes down to the current situation with the lights.
As long as the hardware is in good shape, you’ll have nothing to worry about.
However, if the hardware is in rough condition, then the situation can be more serious. You will not be able to fix the unit by yourself, and reaching out for a warranty claim might just be a good idea. So, be sure to keep all of these pointers in mind.
- Claim Warranty
Lastly, if the issue with the pool light remote control not working is not fixed at this point, then you should probably forward a warranty claim.
There are no other options left, and you will just be holding yourself back when it comes to fixing these errors.
There is a chance that your lights are defective, and you need to contact the dealer for a replacement. The majority of pool light brands offer decent warranty policies to users.
So, you won’t have a hard time trying to secure a free replacement for your pool lights.
In most conditions, replacing the batteries and fixing the tripped breakers will be enough to eliminate the issue. However, if the problem persists even after going through all of these solutions, then calling customer support is your best bet.
Depending upon the reputation of the brand that you’re using, it will not be that difficult to get a fresh piece. For this reason, experts always recommend users engage with reputed brands.
Otherwise, you will only be setting yourself up for failure, and the dealer will not help you at all.
Wrapping Up
Struggling with the pool light remote not working? Try going through some of the fixes listed here, and you will be able to get through these errors in no time.
It all comes down to how you’re planning on addressing the situation, and hiring an expert here is never a bad idea.
With that said, you should always start the troubleshooting process by checking up on the power source. There is a good chance that the issue is more with the power source and not your unit.
So you will be able to figure out the situation accordingly without dealing with any long-term errors.
Just make sure that the hardware and the power going into your system is optimal, and you will have perfect control over the system.
However, if that is not the case and the hardware is in poor shape, then the situation can be a bit difficult.
You will have to reach out to the official support team to get a replacement, and trying to get defective lights to work is only a waste of your time.
So, instead of spending hours of your time trying to fix the lights, just call up the dealer and have him bring you a fresh piece.