If you’re struggling with your Owlet Camera temperature sensor not working as it should, here are a few solutions mentioned below that you can try to troubleshoot the issue.
Owlet Temperature Not Working
- Check Battery Levels
If the batteries in your Owlet Camera are low, it can affect the performance of the temperature sensor. Be sure to check the battery levels and replace them if necessary. When the battery in your Owlet Camera is running low, it may affect the performance of the temperature sensor. Try charging the device or replacing the batteries to see if that helps. Check the battery levels in both the camera and the sensor. If one’s running low on power, it could affect the sensor’s ability to function correctly.
- Check Sensor Placement:
The Owlet Camera temperature sensor must be placed correctly to work efficiently. Make sure the sensor is placed on a level surface and that it’s not too close to any objects that could block its readings. The Owlet Camera temperature sensor should be placed inside your baby’s foot, near the ankle. If the placement is not correct, it will interfere with normal working. To restart your Owlet Camera, power it off and back on. You can do this by holding the power button on the back of the device for 3-5 seconds. Please get in touch with the official support team for further assistance if your Owlet Camera is still not working after restarting.
- Clean The Sensor
A dirty sensor can affect an Owlet camera’s ability to measure temperature accurately. Try cleaning the sensor with a soft, dry cloth. Over time, the Owlet Camera temperature sensor may become dirty or covered in lint, which can affect its performance. Try cleaning the sensor with a lint-free cloth to see if that helps.
- Update The Firmware
Check if a newer version of the Owlet Camera is available. If there is, update your device to see if that fixes the problem. To update the firmware on your Owlet Camera, connect it to your computer and follow the instructions on the screen. If you’re unsure how to update, don’t hesitate to contact the official owlet customer care department. Out-of-date firmware can also cause problems with the Owlet Camera temperature sensor. Be sure to update the firmware to the latest version. You can connect the Owlet Camera to your computer and follow the instructions on the Owlet support website.
- Restart Owlet Camera
If you’re having trouble with your Owlet Camera, one potential fix is to restart the device. To do this, power off the camera and turn it back on. You can do this by holding the power button on the back of the device for 3-5 seconds. Please contact the owlet support team for further assistance if restarting your Owlet Camera doesn’t fix the issue.
- Check The Connection
Ensure the Owlet Camera is appropriately connected to your home’s Wi-Fi network. If it’s not, you won’t be able to use the temperature sensor. Double check that the sensor is correctly connected to the camera. You will face a connection disruption if there’s any loose or damaged wiring.
- Try Resetting The Sensor
If restarting the sensor doesn’t seem to fix the problem, you may need to try resetting it.
- Ensure Camera Attachment
The Owlet Camera must be appropriately attached to the sensor for it to work correctly. Make sure that the camera is adequately secured to the sensor. If it’s not, the sensor may not work correctly. Check again that the sensor is properly attached to the camera. If it’s not seated correctly, it may not be able to take accurate readings.
- Reset
If you’ve tried all the above and your Owlet Camera is still not working, you should consider resetting the device. This will return the Owlet Camera to its factory settings. Please note that this will delete any recorded data, so be sure to back up your files before proceeding with this step.
Please get in touch with Owlet customer support for assistance if you’ve tried all these troubleshooting tips and still have problems with your Owlet Camera temperature sensor. They may be able to help you troubleshoot the issue or offer additional suggestions.