The Owlet Sock brings a ton of utility to new parents, and you can keep track of your newborn’s vitals with this unit. It will help you keep your baby in perfect health, and you’ll have updated information on the heart rate, sleeping cycles, and oxygen levels. However, there have also been a few issues with this unit not charging up when connected with the base station.
While no parent can deny Owlet Sock is an amazing accessory, you’ll sometimes be annoyed by the charging issues. Luckily, it is mostly the cable that is creating these charging issues, and going through the following list should give you a better perspective of the situation.
Owlet Sock Not Charging
- Check For Cable Damage
Most of the time, you can’t really do much about the cable damage, and you’ll have to get a new cord for your smart sock. So, your first step should always be to thoroughly check the cord for possible damage, and there is no harm in trying to reconnect the cables to the base station and the sock. Ideally, that will fix the issue with the Owlet sock, and you’ll be able to charge the device without further complications.
- Change Power Outlet
Sometimes, it is not the cord but the power outlet that is creating this problem with the Owlet sock not charging. To confirm whether or not your outlet is defective, try connecting other home appliances with the same outlet and check the response. If the appliances don’t work with the outlet, then you’ll know for sure that your device is working perfectly, and it is the outlet that is creating charging issues. So, just switch outlets and then try charging your Owlet sock one more time.
In this situation, you should also seek help from a local electrician and get your electrical connections fixed. It is a smart idea to have a professional go over your wiring connections at least once every year to limit any fire hazards and electrical problems.
- Inspect Power Port On Base Station
At this point, you need to check the condition of the power ports on the base station for possible issues. It is not that rare for dirt and debris to clog up the port, and it might interfere with the performance of the base station. So, to avoid this situation, you need to inspect the power port and clean it up a bit. Removing dirt will help address these chagrin issues, and you’ll be able to fully charge the base station.
- Try Resetting Owlet Sensor
Some owners also pointed out that resetting the Owlet Sensor addressed this situation, so if the issue is not fixed at this stage, just reset the sensor. You will have to use the base station to reset the sock and try fresh cables when resetting the device. Hopefully, that will address the situation with the Owlet sock not charging.
- Make Sure The Sensor Is Dry
The sock doesn’t really work that well against water damage, and you need to make sure that the unit is completely dry before trying to charge it up. It is pretty common for the sock to get wet, but that doesn’t mean that your smart sock won’t work ever again. Just leave it in the sunlight for a few hours and then check the response from the sock after connecting it to the base station for charging. If the ports are clean and the sock is completely dry, you will be able to charge it up at this point.
- Defective Owlet Sock
Lastly, it is also possible that your Owlet sock is defective, which is why it is not charging. You can’t really do much yourself about a defective unit, and your best bet is to seek help from the dealer about a replacement. The warranty should cover all damages with the sock, and you need to simply claim the warranty if it is still valid.
Even if the warranty has expired, you will be able to better maneuver through the issue by asking the official support members. So, make sure to reach out to these experts and have them help you fix the Owlet sock when it is not charging.