Owlet is one of the most expensive baby monitoring devices that you can purchase from the market. However, you won’t be getting any reliability even after spending hundreds of dollars on the Owlet devices.
Many customers have complained about the consistency of the smart features, and you’ll only be struggling with the Owlet unit. So, if you’ve yet to make the purchase, going with a different option will serve you well.
There is no point in spending your money on an experience unit when the reviews on that option are sub par.
You will not be happy after paying the top buck for the owlet system, and it will only hold you back in the long run. So, try and stick with Owlet alternatives if you’ve not finalized the purchase.
A common complaint with the Owlet device brought forward by a ton of users is that the night vision won’t work.
This issue with the Owlet night vision is usually not that hard to fix, and some of the steps in this troubleshooting guide can help you fix the Owlet unit when the night vision is not working.
Owlet Night Vision Not Working:
- Try Power Cycling The Unit
Sometimes, the simplest fixes are the right ones! If you’re stuck in these issues with the Owlet night vision not working, the best thing that you can do is to power cycle the camera.
This will not wipe away any configurations and you can just go about using the camera.
However, most owners mistake the power cycling routine as simply restarting the camera. So, you should also avoid the same mistake and remove all power from the unit. From there, you can keep the camera dead for about two minutes.
Once that is done, you can power up the camera one more time and then check up on the night vision mode.
Make sure that all the lights in the room are turned off and there is no exposure to the lens. This means that you need to turn off all the light sources, and even dim down the mobile screen.
After you’ve accomplished that, you can go about engaging the night vision mode and it should work.
As long as the issue is only related to the programming side of things, a quick power cycle will help you out a ton. So, be sure to follow along with these points.
However, you need to also check up on the batteries and make sure that they are not drained. So, if the issue is not fixed at this point, checking up on the batteries should be your next step.
- Get New Batteries
Most of the time, your camera is just dealing with a low battery situation where the unit won’t have enough power to switch to the night vision mode. So, if the mode worked perfectly up to this point, then you’re dealing with a similar condition.
You just have to remove the old batteries from your camera and then put in fresh batteries. That should address power issues with your unit, and the Owlet system will start working perfectly.
If your unit relies on a power cord, then it might be a good idea to find a new power outlet for the unit.
The night vision won’t work if the output from the power source doesn’t match the requirements of your Owlet device. So, just check the response from your unit after changing up the outlet.
- Check Contact Points
Sometimes, it is the contact points on the unit that are creating this problem with insufficient power flow. So, if your camera does rely on a battery, there is no harm in cleaning up these connection points with a microfiber cloth.
You can also choose to clean up the contact points with a diluted vinegar solution or any rust cleaner from the market. That should be enough to address power issues with the Owlet camera installed in your house.
This is especially true if the unit has been installed in your house for a few years, and you’ve not put that much attention to the maintenance side of things.
So, be sure to go about fixing these errors, and you should be able to get a reasonable response out of the system.
Most of the time, it all comes down to how you’re planning on streamlining the power supply.
Keeping track of these points will be more than enough to have you sorted out here. All that you have to do is make sure that the system is able to draw power from the batteries.
- Change Location
The location of the camera has a huge role to play in the activation of the night vision features.
If the camera is placed in a well-lit spot, the night vision features won’t engage. So, you won’t be able to get any response from the night vision features when they are placed in the wrong spot.
You need to change the orientation or the position of the camera and then try working with the night vision again.
- Remove Extra Light Sources
The presence of extra light sources and accessories that shine light directly onto the camera will also lead to the same situation with night vision not turning on.
So, you need to remove these extra light sources and make sure that the camera is not pointing towards a reflective surface.
That way, it would be much easier to maneuver through this situation, and the night vision features on your Owlet system will start working in no time.
- Check For Hardware Issues
In case of hardware issues, the only thing you can do is to claim the warranty and try to get a replacement. You won’t be able to fix a damaged Owlet camera yourself, and the only logical thing is to let the professionals handle this situation.
So, if your camera is in rough shape, it might be best not to mess with the unit further. Claiming the warranty should help you source a replacement within a few days if the purchase was recent.
While the reviews on this system are not that great, the warranty deal associated with this brand is pretty decent.
The customer support fully stands behind all of the claims, and you should be able to grab a fresh piece in on time.
All that you have to do is to provide a proof of purchase and demand a fresh piece.
That will be enough to have you sorted out here, and you will be able to grab a fresh piece from the dealer. Hopefully, you will be sorted out in no time when it comes to the hardware issues.
- Reset Owlet Camera
Next, if you’re sure that there are no hardware issues with the camera, then now is time to reset it to factory settings. All of the stored configurations will be wiped from the Owlet system, and you’ll have to set it up from scratch.
However, if the issue is indeed related to the programming of your Owlet camera, a quick reset would fix everything. Hopefully, you won’t have to get the camera replaced, and the device will start working perfectly in no time.
- Ask Official Support Team
If you’re still stuck in the same issue and can’t seem to figure out a way to address the night vision errors, then you need to call the official support. The unit might just be defective, and there is no point in trying to fix the system on your own.
The Owlet team will be more than willing to help you sort out the situation when you’re running into these errors.
So, if you can’t seem to figure a way out of these errors, just call the official support team and have them help you out. That should have you sorted out in the long run.
Wrapping Up
The reviews on the Owlet unit are not that great and you’ll likely run into some errors with this device.
One of the more common issues that you will find customers complaining about is the night vision, and you will struggle to get any performance from this mode. So, we’ve mentioned some fixes to help you around the issue with the night vision.
All that you have to do is to rely on the pointers listed above, and you should be able to get a better response out of the system. As long as the hardware is in good shape, it is not that hard to get a reasonable response from the night vision mode.
You have to fix the situation with the power supply and then go about addressing the lighting conditions. That should be enough to have you sorted out here, and you will not have to deal with as many challenges down the road.
Hopefully, you will not have to deal with any extensive errors, and keeping these pointers will serve you perfectly.
Just double check up on the hardware, and you will have complete control of the situation. From there, you can also engage the official support team to help you out.