While Owlet is one of the most successful baby monitors on the market, there is no deficiency of complaints about the programming issues with the Owlet camera. Many owners have pointed out issues like blinking or solid red light from the Owlet camera, and they were unable to stream any video from the unit. It can be pretty annoying to run into this situation after you spent all that time going through the initial setup.
The good thing is that you won’t have to do much to get the unit working again. Most of the time, it is just a minor bug, and you can get the streaming features back after trying out some of these basic fixes.
Owlet Camera Red Light
- Check Signal Strength Status
The first thing you need to check is the signal strength, and you need to make sure that the unit is connected to the application. If there is no status on the signal strength section of the app, then your unit has not been connected properly, and you need to remove the device and add it one more time. Luckily, it won’t take up much of your time, and you can check the signal strength immediately through the mobile device.
- Force Close Application
Most of the time, it is the application that is behind this bug with the Owlet camera red light. So, you need to just force close the app and log into the account one more time to address this bug. To force close the application, you can head over to the application settings and then proceed to clear up the cache before clicking the force close option. Confirm your selection, and then launch the app one more time to log in.
- Refresh Network Connection
Sometimes, your network can also lead to the same situation where the unit won’t respond to any input. It can be one of the most annoying situations, and your best bet is to reboot your router. This is mostly enough to refresh the network connection and fix any minor bugs that are affecting the connection status.
You need to make sure that the network speed is optimal, and if the resources from the router are not sufficient, you will have to find a different network to connect the camera. Otherwise, the unit will keep blinking red light, and you won’t be able to access the stream through the mobile app.
- Power Cycle Your Camera
After refreshing the network connection, there is no harm in power cycling the camera and then connecting it with the network to eliminate any programming bugs in the system. It won’t take a lot of effort, and you just have to remove power for a few minutes from your camera. Allow the unit to power back on after a few minutes, and then wait for the device to connect to your home router. After that, you can access it through the application to check the response.
- Try Updating The Application
It is also possible that you’re dealing with these issues with the Owlet camera red light because of an outdated application version. So, you need to browse the Google Play Store for possible updates. Most of the time, a simple update will fix the issue, and you won’t have to bother with more solutions.
Moreover, you’ll enjoy better connectivity with the camera along with improved features and app optimization by updating the app. For this reason, there is no point in sticking with the outdated version for a long period.
- Factory Reset Your Device
Resetting the device to factory settings should be your last option as it removes all of the configurations. You will have to set up the camera from scratch. However, if you’ve not been successful with the troubleshooting process, there aren’t many other options left. You will have to reset the device and then pair it up with the mobile application one more time to address this situation.
You can also choose to contact the customer support professionals regarding this situation with the Owlet camera not working. So, try to reach out and have the customer support professionals help you with the smart camera. Hopefully, you won’t have to waste much time in the troubleshooting process.