Is It Possible To Add Multiple Nest Thermostat?

A smart thermostat is one of the best things that you can buy if you want to save energy. The cooling or heating bill can have a significant impact on your monthly budget.

So, you will need to consider saving on this budget by properly managing the performance of your HVAC system.

Luckily, smart thermostats like Google Nest help you minimize these expenses while providing you with the optimal temperature inside the apartment.

It might be a bit on the expensive end, but the performance will more than justify the purchase in the coming years.

Usually, you shouldn’t have any compatibility issues integrating the nest into your home system. Still, if you’re using an outdated system, then it would be best to check the compatibility list before buying Google Nest.

Now let us go over what users have been wondering about and whether or not you can use multiple Nest Thermostats in one home.

Add Multiple Nest Thermostat:

There are no issues that users have mentioned so far about using multiple Nest thermostats in one house.

It is possible, and you can link up the different Nest devices with a single app. Many advantages can be realized while using multiple Nest thermostats in your home.

However, there are still limitations to how many Nest thermostats you can use at a given time. Ideally, there shouldn’t be any problem if you are using less than 10 thermostats in a single location.

But exceeding the limit set by Google will create some issues when it comes to temperature control. Your sensors might start malfunctioning, and you won’t be able to configure everything through a single app.

However, if needed, you can make separate Nest accounts and configure the device separately with another mobile phone to get around the multiple-device issue.

But it is quite rare for users to install more than 5 temperature control devices in their houses.

So, even if you have a massive mansion with multiple floors, going with two or three thermostats will be all that you need.

It will provide you with more control over the HVAC system, and you can hire some local contractors to help you manage the configurations further.

If you try to get through everything yourself, there is a chance that you might mess up the optimization of the HVAC system. So, instead of testing out the controls through a trial and error method, just get help from a certified expert. 

 

He will charge you a bit of cash, but you will enjoy the phenomenal performance, amazing efficiency, and effortless controls over the coming years.

A bit of investment here might just save you a ton of cash in the long run. So, be sure to get help, and you will avoid a ton of pitfalls along the way.

Adding Multiple Nest Thermostat

The new Nest thermostat can be added to the application quite easily by launching the app and clicking on the + icon from the menu to add another device.

After pairing the thermostats, the app will guide you through the setup process, and you will have everything in order within a few minutes.

There are sometimes no downsides to using multiple Nest thermostats in your home, but rather you get a lot of benefits if you have more than one thermostat.

Some customers believe that the efficiency of the system will go down if there are multiple thermostats installed.

But that is not the case, you will still get the same efficiency from your system while increasing the amount of control over the temperature inside your apartment.

All that will change with the addition of the new thermostat is that you will have better zone control. With the new thermostat, it will be effortless to isolate some sections of the apartment and define a new routine for those rooms.

Similarly, the only strain that you will feel will be on the budget, and once the installation is complete, you just stand to benefit from the extended range of features offered by this system.

So, if you’re still skeptical, now might be a good time to go through with the upgrade. 

It all comes down to what type of features you’re aiming to realize by installing the new unit.

If you’re not satisfied with the current controls and need more accurate zone control options, then going with an additional thermostat will sort out your situation.

Similarly, if you want to manage the temperature of different zones inside a massive mansion, just install a few extra Nest devices and configure them with your mobile application.

Advantages of Using Multiple Thermostats

Among other things, the first benefit that you get after adding multiple thermostats in your home is that different zones can be defined according to a given area in your home, and you can manage the temperature of that zone without affecting the overall temperature settings. 

Meaning that if some members of your family like to bring down the temperature inside their room while you like the temperature to be high, then you can get around this problem by creating a different zone for their room and bringing down the temperature for them.

Similarly, if you’re someone that lives in a house with multiple stories or is sharing a house with someone else.

Then by installing multiple Nest thermostats, you can change the temperature of different floors depending upon the preference of members inside your house.

You can also turn down the heating or cooling for a certain section of your home to bring down the cost of your energy bill.

All in all, having multiple Nest thermostats in your home is very helpful and allows you a greater degree of control over different sections of your house.

You can add multiple devices from the mobile app after you have paired them with your system.

The setup procedure is quite easy, and new Nest devices can be added by using the home menu. But if you’re having issues with using multiple devices on your application, then asking Google Support for help might not be a bad option.

They take customer responses very seriously and try their best to sort out any issues that you have with Google devices.

The Downside

One of the only compilations that you might face with this setup is that the configurations can be a bit hard to manage.

It is not that rare to see homeowners relying on local contractors to help them with the setup, and you will have to do the same if you’re new to the market.

This might seem like a bit of an extra strain on your budget, but that is the price you will need to pay to get a decent response from the system. There is no point in relying on trial and error as you’re trying to adjust the system.

You will only mess up the existing configurations and won’t be able to get a response from the system. Instead, you need to seek help from a local contractor, and he will help you optimize the HVAC system as well as the thermostat configurations.

From there, you will never have to worry about zone control issues or any other errors that might present you with the same errors. It all comes down to how you’re planning on addressing the situation.

Seeking expert help is never a bad idea, and you will save yourself hours of hassle.

Lastly, if you’re trying to isolate one section of the home, then you should rely on different applications. It will help you keep track of the temperature controls for the independent sections without worrying about the overall configurations.

So, it all comes down to how you’re planning on developing the setup. Having multiple nest thermostats can be great and will serve you with years of consistent performance just as long as you set them up correctly.

For this reason, we suggest that you hire an expert to help you with this job. 

Wrapping up

Planning on expanding the control of your HVAC system with a second Nest thermostat?

It is pretty easy to accomplish by following some of the pointers mentioned above. There is no need to isolate the new thermostat to a different account in most situations. 

You can pair up everything to the same setup without having to worry about any long-term issues.

It might be a bit of a hassle at first, but you can also rely on an official from Google Support to help you through the issue. There is simply no gain in trying to get through the situation on your own.

All you have to do is to send a ticket explaining your situation. These experts will take a peek at your case and inquire about more details to get a better hang of the situation.

From there, you can go about following their instructions on how to fix the unit. 

It will only take a few moments at max to adjust the system if you’re not dealing with any configuration errors.

However, if you do find one system to be defective or damaged, you will need to get a replacement. There is no other way around fixing a damaged device.