The Maytag Neptune Washer is a great machine to have in the house as it comes with features that help wash away most of your clothes with the minimum level of effort involved. However, the problem with these appliances is how they can often run into problems.
Talking about this, a common complaint that you will hear about the Maytag Neptune washer is that the door won’t lock. In case you have encountered this issue on your end, then here are the things that you can do to get the issue fixed for good:
How to Fix Maytag Neptune Washer Door Will Not Lock?
- Checking the Drums
The first thing that you will have to check for in these appliances is any kind of obstruction. For this purpose, we recommend that you start with ensuring that there isn’t any kind of item inside the drum that may be causing the door from closing like it’s supposed to.
All you have to do is to open your washer and start checking if your washer is overloaded or if any item is stuck inside. In case of an overload, just remove the items from the washer after which it should be able to properly close.
- Ensure the Door Switch Engages
As simple as it may sound, we have seen cases where the washer’s lock didn’t engage just because it wasn’t closed properly. To prevent this from happening in the first place, just make sure that you have firmly closed the door.
You have to keep in mind that unless the door didn’t fully close, the lock will never engage. This is why you have to make sure that you close the door.
- Power Cycle
Another way you should be able to quickly troubleshoot the washer is by simply making it go through a power cycle. More specifically, we recommend that you start with unplugging your washer from any power source and keeping it in this state for about a minute.
Once the minute’s passed, you can try plugging it back in. Afterward, choose a new wash cycle followed by pressing down on the Start button. Now, you will have to wait around 3 minutes after you have turned on the wash cycle. This will help the lock to successfully engage after the process is fully done.
- Soap Build Up
Over time, soap can build up on your washer which can cause all sorts of issues to pop up. To avoid these, you will have to make sure that you clean your washer thoroughly. Do make sure that you cleaned the door area of your washer.
- Hardware Fault
At this point, it would be safe to assume that you might have some hardware fault. Unfortunately, there isn’t much that you can do about the washer if that is the case. The only thing that you should be able to do is to get a full replacement of the component.
Doing so will require you to spend a few bucks on getting the component. However, if your washer is already beyond repair, then you may have to opt for a complete replacement.
- Getting Professional Help
Apart from trying all the solutions that we have listed above, one more thing you can do is to call in a professional in the field and ask him for help on the matter. After checking the washer for any possible faults, he should be able to apply repairs accordingly.
The Bottom Line:
Will your Maytag Neptune washer door not lock? To fix this, you can try keeping up with all the instructions that we have listed in the article above. Doing so should help you be able to resolve the problem in no time. For more like this, be sure to check out our other articles where we have discussed how you can troubleshoot all sorts of problems related to smart devices.