Lutron is known for providing its customers with superior light control through their wide range of products. They are mostly known among the community due to their high-end dimmers and switches. They are used to have more control over your smart house’s lights.
It does not matter whether you want to lower your energy costs, or just have more control over your lights. Lutron have the solution to all of these problems through giving you a simple cost-effective way of controlling your lights. All you have to do is to get started on using their products.
How To Fix Lutron Switch Operation is Reversed?
Most of the users using the Lutron switch have reported facing an issue where their switch’s operation is reversed. What this means is that if flipping the switch is supposed to turn off the lights, then it is doing the opposite of that, i.e. turning the lights off.
Although the lights and switch themselves are working just fine, this issue can still be frustrating. Luckily, there are some things that you can do about that. We will be using this article to explain to you how you can fix this. So, let’s get right into it!
- Check Your Wires
If your operations on the switch are reversed, then the most common reason to why this is happening is simply because it isn’t installed like it should be. To be more precise, you may have installed the wires and connected them oppositely.
In either case, first you have to make sure that you turn off power from the breaker. Once you have made sure of that, simply remove the switch and check all the wires connected to the switch. There should be two power wires. One should be connected to the common terminal, while the other should be connected to the terminal on the opposite side of the switch. Try interchanging the wires. Swapping the wires correctly should fix the issue.
- Turn The Switch Upside Down
If you have tried changing the wires in every way possible and haven’t made any progress at all. What you can do in this case is to simply remove the switch and install it upside down.
What this will do is to make it look like that the switches are working correctly. You won’t really be fixing the issue, but it should help you nonetheless. The switch operation shouldn’t look like they are reversed anymore.
The Bottom Line
In this article, we have explained the 2 different ways on how you can fix Lutron switch operation is reversed. Make sure that you read and follow every instruction that we have mentioned in the article. After you have made sure of that, you should be able to effectively fix your issue for good.
My on off function is in reverse. Up is off and down is on. But the dimmer slide is correct. Up is brightest and down is dim. I don’t know why. Please help ?
Same William, also looking for an answer on this. I tried swapping the wires and nothing changed. If I turn the switch upside-down the dimmer will be incorrect.