6 Methods To Resolve Lutron Schedule Not Working

lutron schedule not working
lutron schedule not working

The Lutron systems provide homeowners with the perfect toolkit to make their devices more efficient. However, it is not that rare to come across users complaining about programming-related issues. The community forums are filled with reports on the Lutron Schedule not working.

Even after setting the schedules through the smart unit, the lights won’t go off or come on during the defined period. Similarly, the timer will not engage any other smart device at the defined schedule.

This issue might not seem that serious, but it can have a huge impact on all of your smart devices. So, you should focus on fixing these schedules immediately, and the following solutions will help you better manage the smart system.

How to Fix The Lutron Schedule Not Working

  1. Check Clock Configurations

The clock configuration is the first thing you need to check when the Lutron Schedules are not working. Make sure the clock mode is set to normal and the time you’ve set is correct. Usually, this fixes the problems with the schedules not working, and you will simply have to update the clock mode and the timer to get everything back on track.

  1. Power Cycle Lutron Bridge

After fixing the clock configurations, there is no harm in power cycling the Lutron bridge. This will only take a second and has a decent shot at fixing the issue. So, if you’re still stuck in the same problem after updating the clock time and mode, then pull the power from the main bridge.

Next, you need to wait for around ten to twenty seconds and then supply the power again. Give a few minutes for the bridge to boot, and then test out the performance of the schedules over the next few hours.

  1. Improve Network Strength

The Wi-Fi conditions have a huge role to play in this situation with the Lutron Schedules not working. Even when you’ve managed everything perfectly, and the device is not defective, you will run into performance issues with the Lutron Schedules. So, if the Wi-Fi router is placed far away from your smart system or it has a poor connection, then you need to find a better spot.

Bring the router closer to the smart devices and also refresh the network connection by updating credentials. This will remove the network from all devices, and you will have to configure the router again. So, make sure to set aside enough time to connect all of your devices with the router again.

  1. Update Device Firmware

Updating the device firmware should be your next move when the Lutron Schedules are not working. It is pretty common for users to run into these situations when they ignore the updates for an extended period.

If you’ve also been avoiding the updates, then now might be a good opportunity to update the smart unit. So, simply go through the system update and then check the performance from your schedules. They should start working with your smart unit.

  1. Re-Add Schedules

Sometimes, removing the schedules from your smart device and then adding them again is the best move you can play. So, if the issue is not fixed at this stage, there is no harm in removing the schedule from the Lutron unit. This will help you eliminate programming bugs within the system, and once the schedule has been updated, you will get optimal performance from the unit. Just Make sure that there is nothing wrong with the timer or the mode, and your unit will work perfectly.

  1. Reset Your Lutron Devices

Ideally, the issue with your Lutron Schedules should be fixed at this stage. However, if you’re still stuck in the same problem, then your last move is to reset the Lutron device. It will only take a while, and you will have to set up everything from scratch. So, keep that in mind as you reset the Lutron device to get the schedules working again.

It is also a smart move to involve experts from customer support to help you narrow down the main issue. Everything isn’t always black and white, and seeking help from a professional is the best method of narrowing down the problem. So, ask professionals from Lutron customer support to help you with the issue.

2 thoughts on “6 Methods To Resolve Lutron Schedule Not Working”

  1. My Lutron Caseta has four schedule morning lights on and off, and evening lights on and off. The system has worked perfectly for almost four years but a few days ago the schedule functions stopped working. I can still control all the light with my Lutron app on my iPhone, but the schedules do not work. Any ideas of what is causing this?

    Reply
    • Hi I was reading your question on the Lutron schedule not working. Did anyone ever reply? I’m having the same issue. Thank you.

      Reply

Leave a Comment