Even when you’re purchasing items from some of the most reliable brands on the market, it is not a good idea to ignore the maintenance requirements. While there is no debate that brands like Levoit offer some of the most consistent devices on the market, ignored maintenance will eventually create performance issues with their air purifiers.
Many owners complain about issues like the Levoit Air Purifier sensor not working after just a few months of use. This can also be traced back to ignored maintenance, and you’ll have to deal with a similar situation when the Levoit Air Purifier sensor is not working. So, here are some solutions to help you with the Levoit Air Purifier Sensor.
Levoit Air Purifier Sensor Not Working
- Check For Buildup
The most common reason behind the Levoit Air Purifier sensor not working is the excessive debris and dust buildup on the unit. The sensor has to be cleaned every two weeks, and this frequency can vary depending upon your local conditions.
So, make sure to check the condition of the sensor and use a vacuum brush to suck up the dirt lodged in the unit. That should free up the sensor, and you’ll be able to get the desired performance from your device. Make sure to keep track of the monthly maintenance, and you won’t have to think about the same issues again.
- Power Cycle Your Device
Sometimes, power cycling the device is the best method where you will be simply removing power from the unit for a couple of minutes and then turning it back on. This should be enough to address the minor communication bugs, and you’ll get a response from the sensors.
However, you should still clean up the sensor one more time, even if you can’t see any dirt lodged inside the device. That should be enough to get the Levoit Air Purifier sensor working again.
- Try Using A Fresh Filter
A few owners also mentioned that using a fresh filter and cleaning up the filter compartment will address this situation. So, if you’re stuck in the same situation and you’re sure that the sensor is clean, there is no harm in replacing the filter. It will also improve the performance of your device while also helping you through this situation.
So, just install the fresh filter and make sure that lint is not clogging up the airflow. Once the device is fully cleaned, you should be able to get the desired response from the sensor.
- Find A Better Spot For Your Purifier
The placement of the device will also impact the performance of the sensor, and if you’ve placed the Levoit Air Purifier too close to a wall, it won’t pick up anything from the room. So, to get an accurate reading, you need to clear up a spot close to the center of the room.
That way, the readings will be accurate, and your device will be able to adjust accordingly to the surroundings. There is no point in keeping the purifier in a corner, and its sleek design will blend right in with your home decor.
- Reset Air Purifier
If the issue with the Levoit Purifier Sensor is not addressed at this stage, then only two possibilities exist. Either you’re using a defective unit, or there are some serious software-related issues with your device. To narrow down this problem, you should factory reset the Levoit unit and then judge the response from the sensors. If the sensors are indeed defective, you will have to get a replacement. However, if you’re sure that there are no hardware issues with the device, then a simple reset should set everything in order.
- Claim Warranty
For the vast majority of customers, cleaning up the sensor addressed this situation, and they didn’t have to bother with more solutions. So, if you’re still stuck in the same problem, just contact the Levoit dealer and demand a replacement. The warranty will cover these issues if your purchase is recent, and you can reach out to the dealer for confirmation. Hopefully, you won’t have to wait long to secure a replacement from the dealer, and the new unit will work perfectly in your home.