6 Reasons For Levoit Air Purifier Fan Not Working

Levoit Air Purifier might be the most popular unit on the market, but you’ll see a ton of complaints when it comes to the functionality of the internal fan. While there is no debate that Levoit is one of the most feature-rich and high-performing units on the market, you will still run into minor issues like the Levoit Air Purifier fan not working.

Occasionally, this issue with the Levoit Air Purifier fan not working can be linked with ignored maintenance or incorrect installation of the filter. So, you don’t have to worry about hardware issues, and following these methods should get your Levoit Air Purifier Fan working again.

Levoit Air Purifier Fan Not Working

1. Check For Lodged Plastic In Filter

If you’ve recently changed the Levoit Air Purifier filter, and the fan stopped working after the replacement, then you need to check for lodged plastic. It is not rare for users to forget the removal of all plastic packaging, and it can block out the airflow. So, you need to check the filter compartment and then check the response from the fan. Make sure to also power cycle the Air Purifier once to narrow down on the problem.

2. Try Increasing Fan Speed

Sometimes, the issue with the fan not working is only related to minimal fan speed or the fan being in sleep mode. So, you won’t really hear the fan working even though it is blowing out air from the unit. You can confirm this suspicion by increasing the fan speed, and if you do hear the sound of the fan spinning, you’ll know for sure that there is nothing wrong with the fan. For this reason, you should mess around with the fan speed and turn it up to max if you’re sure that the unit is powered up and there are no power-related issues.

3. Reinstall Filter 

It is also possible that the orientation or the installation of the filter was not correct, and you need to adjust the placement of the filter to get ahead of these issues. So, just remove the filter and then insert it properly in the compartment. Make sure that there are no obstructions and there is no harm in cleaning the filter one more time. This will open up the airflow, and you’ll get better performance from the fan.

4. Find An Open Spot 

The Levoit Air Purifier Fan requires open space to work properly, and the fan won’t work when you’re installing the purifier in a congested region. So, you need to clear up some space around the unit and make sure that nothing is blocking the airflow. Otherwise, the fan won’t be able to pull sufficient air from the surroundings.

Ideally, you should be placing the air purifier in the middle of the room for maximum performance, and the sleek design of this unit will fit right into your existing unit. So, make sure to find a better spot for your air purifier and place it close to the center of the room to avoid issues with the fan.

5. Fully Service Filter Compartment

At this point, you need to check for lint and lodged debris in the filter compartment that might be blocking the fan from getting sufficient air. Even if the filter is clean, you need to make sure that there is no lint in the compartment. So, fully service the unit and then try using the fan at full speed. If there are no hardware issues with the fan and you’re sure that it is not in sleep mode, then you’ll be able to secure the desired response from the device.

6. Check For Hardware Issues

If the unit is in rough condition and you’re not getting any response from the unit even after trying out all of these fixes, then you need to check for hardware issues. For this reason, it is a smart idea to call the dealer and demand a replacement. If the purchase was recent and it has not been more than a few months, getting a replacement won’t be that difficult. So, just forward a warranty claim and wait for the official support members to provide you with a replacement. Hopefully, you won’t have to think about the same complications with the new unit.