If you’re looking for a unit that will serve you well in a room smaller than 400 sq ft., then going with Levoit Air Purifier is not a bad choice. This brand has set the standard when it comes to air purifiers, and you’ll rarely find customers complaining about the performance of Levoit Air Purifiers. However, there have been some concerns about the Levoit Air Purifier Display not working.
These issues with the display are pretty rare and can be linked to insufficient voltage in the system. However, there is still a possibility that your unit is defective and needs to be replaced. So, here are your options when it comes to Levoit Air Purifier Display not working.
Levoit Air Purifier Display Not Working
- Check Power Outlet
If you’re not getting any response from the display, then it points towards power issues with the Levoit system, and you need to make sure that the power outlet you’re using is optimal. You can narrow down this problem by connecting a different appliance with the outlet and then checking the response from the different units.
If the outlet is indeed defective, then you won’t have to worry about much, and all you need to do is to find a different spot for your purifier. You should also consider hiring a professional electrician to help with the wiring connections, as it is not a smart idea to leave defective connections unattended when you’re using smart units.
- Inspect Cord For Damage
If a different appliance works perfectly with the outlet, then you need to check the power cord for possible damaged. Even if the cable is slightly frayed or kinked at a weird angle, the smart thing to do here is to get a replacement.
You won’t be able to maneuver through power issues when the cord is defective, and you can reach out to the Levoit dealer to secure a replacement. Similarly, taking your unit to a repair center is not a bad choice if you want to get the issue fixed quickly.
- Power Cycle Your Purifier
Even when there is nothing wrong with the outlet or the power cord, your display can malfunction because of programming issues. So, you need to power cycle the purifier and then judge the response from the display. If there are no hardware issues with the control board, you should be able to get the Levoit Air Purifier after shutting it down for a few minutes and turning it back on. Hopefully, you won’t have to bother with more solutions up to this point.
- Check For Water Damage
If the unit is not fixed at this stage, then the chances for hardware issues and unit defects increase by a massive margin. So, you need to check the unit for possible water damage. This device doesn’t hold up that well against water damage, and you will have to claim the warranty if the display is not working even after trying out all of these fixes.
- Try Resetting Your Unit
Sometimes, programming bugs can also lead to the same situation where the display won’t respond to any input. In this situation, your best bet is to reset the unit back to factory settings. This will address all the minor bugs, and you’ll have to configure the system from scratch. So, make some time for the reset, and then try using your display one more time. If you’re sure that there are no hardware issues or defects, then the display should come online.
- Call Levoit Support Department
The last thing you can do is to reach out to the official support for help. It is not always a smart idea to spend hours in the troubleshooting process, and you’ll avoid a ton of hassle by seeking help from the experts. If you’re sure that the power connections are working perfectly and the voltage output from the source is optimal, then you are likely dealing with a defective unit.
So, just call the experts and have them provide you with a replacement when the Levoit Air Purifier display is not working. There is nothing you can do yourself about a defective unit, and sourcing a replacement is the only logical choice in this condition.