The Leviton Series 1000 is a solid electrical meter that you can get for your smart house. These devices are designed for maintaining a permanent connection between all your electrical services inside the house. If you own a Leviton series 1000, then chances are that you might have experienced error codes when using the meter.
If you do, then it is important that you know exactly how you can troubleshoot these. Using this article, we will be explaining in detail exactly how you can get rid of any error code that you are bound to face. So, let’s have a look!
Fixing Leviton Series 1000 Error Codes:
- Power LED Not Illuminating
The first error that you can get when using the series 1000 is regarding the power LED. In case you notice the LED to not turn on, we recommend that you start with checking all the connections and that there isn’t any kind of trouble with the wires.
Once you have made sure of that, you can then try testing the voltage to ensure that power is being supplied to the device through an AC voltmeter. Apart from that, you can also remove any extra line fuses and test the whole equipment using an ohmmeter. However, make sure that you have the power turned off when doing so.
- Registered Low Consumption
This is another common error that you may get while using the meter. According to the users who were experiencing this particular issue, they mentioned how you are supposed to check if the reverse phase LED is not turned on. Even if it isn’t, it is still recommended to see the double CT orientations.
Similarly, you have to make sure that both the voltage and the current connections are all in phase. You will have to physically inspect all the fuses and power connections to ensure that everything is in order.
- Load LED Not Flashing
In case you see the load LED not flashing at all, then you should start with checking the CT orientations and connection. Ensure that there is enough load so that it can draw the required current that is needed for operation.
You can also make use of an AC voltmeter through which you should be able to test our if the voltage being supplied to your meter is enough. If not, then you will have to apply the repairs accordingly. As this issue is mostly related to your connection, make sure you don’t miss out on anything while doing the inspection.
- Reverse Phase LED Lights up
The last common error found inside the Leviton series 1000 is regarding the reverse phase LED that seems to light up. In such cases, the first thing that we recommend you do is to ensure that your phasing is correct. To check this, ensure that your CT1 is one line 1, CT2 is on line 2.
Likewise, just as mentioned earlier, you will have to inspect both the connections and the CT orientation for any possible issues. Besides this, you will have to verify that more than 1 amp of load is being draw while connected to a meter.
Seeking Professional Help
If you seem to be facing any issues that might have occurred and can’t find them on the list above, we strongly advise referring to a professional. Similarly, if none of the solutions are working for you, you could be dealing with a more technical fault.
At times like these, it is recommended that you get in touch with the support team or a verified professional instead.
The Bottom Line:
Facing error codes on the Leviton series 1000? If so, then all you need to do is to follow the instructions that have been listed in the article above. We have successfully listed all the common problems along with their solutions in a detailed manner. So, be sure to read through it all which should result in you swiftly resolving any error codes.
What does it mean when the LCD display on the Leviton 1000 series “Lo”?