Is there a problem with the LaView security camera? It’s possible that you’re curious about how to troubleshoot the issue; if so, you’re in luck!
In this post, we will take you step-by-step through the process of resetting your security camera so that it will begin functioning as soon as possible.
There are three reasons why security cameras become inoperable: a lack of power, a loss of internet connectivity, or a malfunction of the camera’s components (broken parts or wires).
You will be able to get your camera back up and running much more quickly if you are familiar with a few fast-troubleshooting procedures.
LaView Camera Offline
Even if you aren’t familiar with LaView, our devoted staff of customer support professionals will assist you in diagnosing any problems and getting things back on track as quickly as they can be.
Why Your LaView Security Camera May Go Offline
It’s possible that your LaView security camera won’t work when you need it the most.
Your camera won’t be able to connect with your DVR or router if your internet connection isn’t working properly, which will result in a lost signal.
Anyone who depends on the additional peace of mind and protection provided by their home monitoring system may find this to be bothersome.
You are in luck since there are a number of things you can do to troubleshoot a LaView offline problem and get your camera back online in a hurry.
To begin, the camera system won’t work if the power goes out in your home, regardless of whether the blackout was caused by a storm or was planned in advance.
If your camera is powered by batteries, you need to check the charge on them on a regularly to ensure that you do not have a power failure at an inopportune or essential moment.
This scenario is more likely to play out in the event that the camera in question is powered by a battery.
Because the majority of security cameras are hardwired to their sources of power, this is often not a problem.
In addition, wired cameras may be converted into wireless devices, as was discussed before.
- Power Cycle The Camera
Unplug your security camera from its power supply for one minute if you have think there is a problem with the power supply, and then reconnect the camera once the minute has passed.
After waiting for a reconnection for two minutes, you should check to see whether it has been brought back up yet.
If it hasn’t already, follow these instructions until the LaView security camera you want to use has connected to the internet again.
In certain instances, the problem may be fixed by turning off the device and then turning it back on again.
- Check Your Connection
Rather than immediately thinking that there is a problem with your LaView security camera.
You should first check to see if there is a problem with your internet connection by using a different device.
You should also attempt to restart any devices that are directly or indirectly linked to your network.
It’s possible that restarting these devices will fix any problems that were caused by software or hardware failures.
- Check your internet router
If the camera’s power supply isn’t the issue, then it’s possible that there’s a problem with the connection to your wireless internet.
Turning off the power on your camera is the first step in diagnosing and fixing this problem. Next, make sure that your modem and wireless router are both turned off.
Please wait one minute before turning the power on for the modem. After thirty seconds, you should reactivate the router.
Please be patient and wait an additional thirty seconds before turning the power back on to your camera.
- Reset Your Camera
The next step that you might do is to reset your camera back to its factory settings. Find the manual that was included with the item and read it.
In the event that you have misplaced the handbook, the vast majority of instruction manuals for current devices may be found online on the website of the manufacturer.
All you need to do is disconnect and reconnect your LaView camera. To do so, simply unplug your camera’s power cable for 30 seconds then plug it back in.
You can also reset your LaView DVR by pressing and holding down on your DVR remote for 2-3 minutes.
If that doesn’t work, try rebooting your router: Unplug your router from its power source for about a minute before plugging it back in.
- Restart your network storage
If your Laview camera cannot be accessed online, you should attempt to restart your network storage. You’ll need to give your LaView camera a fresh start if you’re going to use it.
After you have disconnected it from your network and reconnected it, the status light on the device should begin flashing orange and red.
After you have plugged in, you should wait at least sixty seconds before hitting the Connect button again.
If you are using an IP camera from a different manufacturer, you should reference the owner’s handbook of that camera for advice on how to restart it.
In most cases, this step will address any software faults that may be the source of the problems you are experiencing with your camera’s connection.
- Bolt down equipment
If you have just moved into a new house or if you have had other people working on your property,
Double check that all of your security cameras are firmly attached to their stands and that all of the cables are bunched up and secured.
During the remodeling process, cables have the potential to become loose if they are not taped down, you should ensure that your cables are as tight as is practically feasible.