iRobot Braava Jet M6 features a simple design and an easy-to-maintain structure for the owners. You won’t have to go through hours of work just to free up the wheels from a bit of clogged hair. For this reason, the lifespan of the iRobot Braava lineup is much more than other options on the market. So, if you’re looking for a device that is easy to handle, going with iRobot Braava Jet M6 is a decent option.
In case of any and all issues, the ring indicator on this robot will light up different colors, and when this light turns red, you’ll be sure that there is something wrong with the robot. So, just follow through with some of these troubleshooting methods to fix your machine.
iRobot Braava Jet M6 Red Light Fix:
- Check Charging Status
The charging status on your iRobot is the first thing that you should check when the robot is blinking red. You can easily isolate the issue further by holding down the clean button. It will provide you with more perspective on the issue, and you won’t have to spend any time trying to guess the issue. So, simply place the robot on the charging station for a few hours and then press the clean button to find the exact issue with your unit.
- Refill Tank
Most of the time,, the red light on the unit is there to remind users that they have to refill the water tank. Depending upon the duration of the cleaning cycle, it is best to refill the tank every day. There is no point in using the same water tank for more than two cleaning cycles. So, if the red light is on and you’re sure that your device is powered up perfectly, just refill the tank.
- Free Up Wheels
Freeing up the iRobot Braava wheels should be your next step if the red ring problem is not fixed at this point. So, all you need to do here is to remove the hair from the base and make sure that the wheels are able to move freely. Otherwise, you’ll remain stuck in the same situation with the iRobot Braava Jet M6.
- Clean Up The Body
If you’ve ignored the maintenance for too long, then the issue might be related to the excessive presence of debris on the sensors. You need to grab a fresh cloth and then wipe away all the dirt from the unit. Make sure that the unit is placed on even ground, and then start the cleaning cycle once. That should be enough to help you with the cleaning cycle.
- Try A New Pad
At this stage, you should also check the placement of the cleaning pad and then wash it properly under warm water to get the desired cleaning performance. However, if the issue persists even after you’ve tried rinsing through the pad, just find a new one for your unit. Hopefully, you don’t have to worry about much after changing the pad.
- Check For Damaged Sensors
There is always a possibility that the sensors are damaged on your robot if the red ring won’t go away even after all of these fixes. Of course, you can get more information by pressing the clean button, and the only way to fix damaged sensors is to get the unit repaired.
However, if your purchase was recent, there is no harm in claiming a warranty on this device. So, simply check for cracks on the robot and make use of your warranty to get yourself a fresh piece from the dealer.
- Try Power Cycling The Robot
Sometimes, the issue is not that serious and just a minor programming bug with the iRobot Braava Jet M6. So, to isolate this issue, you need to remove power from the unit and then power it up again. It will only take a second, and you won’t be losing any configurations from the cleaning robot. After that, you can simply test out the cleaning performance.
On the other hand, some users also prefer to completely reset their device to factory settings. So, if you’ve yet to get ahead of these issues, just go through the reset routine, and you won’t have to worry about a thing.