The affordable price tag of the iLife W400 floor washing robot brings a ton of utility features to the owners. While it might not be the most advanced option in the market, you won’t be restricted by the performance of this option. So, if you’re looking for something that is exceptional in performing the basic cleaning tasks, then going with iLife W400 might be one of your best options.
It takes little effort for the robot to clean the smudges from your floor, but there are some common problems that you will have to deal with occasionally. Some of these common problems can be fixed by basic troubleshooting methods. The following list should give you more perspective on the issue.
iLife W400 Problems
- Water Tank Problems
The water tank is one of the most crucial components of this system, and you will have to manage it accordingly to avoid any issues with the cleaning performance. There have been multiple reports of users complaining about the improper installation of the water tank. So, you’ll have to check the tank connection to fix any water supply issues.
Removing the water tank and installing it in the unit should fix the majority of issues with the water supply. So, try to start with the reinstallation of the tank and recheck the cleaning performance.
- Clogging Problems
Clogging issues are also pretty common where you won’t get any water from the tank to the unit. If you’re in a similar situation, then checking the water inlet is your best bet. You will also get an orange indicator on the unit when the system is running into this problem.
A quick servicing cycle to this inlet should be enough to clean out the unit, and you will be able to fix the clogging problems. However, if the issue persists, then you might have to take apart the unit and clean the inlet thoroughly. Make sure to seek help from an expert before opening up a new unit.
- Jammed Brush
The brushes on your unit can also get jammed from time to time. Usually, you will get a voice alert in this situation, and the system will inform you that the main inlet is clogged. You will have to start by inspecting the main brush for any obstructions on either end of the unit.
If there are no obstructions in the system, just clean both sides of the main brush and then try to engage the system again. It should start working without further issues.
- Movement Restrictions
Debris and hair on the floor can have a huge impact on the movement of your robot. The nose wheel is responsible for the direction of the cleaner, and it can be clogged with debris. So, if your robot is showing signs of movement restrictions, then the unit is running into the same problems.
To get ahead of these movement restrictions, try to remove the debris stuck with the wheel and pull out any hair behind the wheel. That should be enough to eliminate the issue with the robot not working perfectly.
- Contaminated Sensors
The sensors on your robot can also get covered with debris, and you will notice a steady decrease in performance. Luckily, it is not that difficult to get ahead of these problems with the sensors, and most often than not, a quick service cycle will fix everything. So, when you hear the alerts that the drop sensors are clogged, grab a damp cloth and clean these sensors.
Don’t try to use excessive force on the system, and quickly cleaning these contaminated sensors is enough to eliminate all problems. So, just lightly brush off the dirt and try to operate the unit again.
- Decreased Responsiveness
If the unit is not responding correctly and you keep struggling with performance issues, then the best thing you can do is change the batteries. While the batteries in this unit are meant to last for an extended period, replacing the batteries after a few months of performance should be enough to fix the responsiveness.
However, if the issue doesn’t get fixed after changing the batteries, try to contact the experts from customer support. There is likely an issue with the wiring in your unit, and claiming the warranty is the best option here.
the robot i Life W400 not functioned, keep on say “please clean the job centre”, what should I do? please advise.
My robot is same issue buying in Malaysia. But nobody to advise. Please advice in my email. Tq