6 Common iLife Vacuum Problems Troubleshooting

The tremendous suction of iLife vacuum cleaners is well-known around the globe, but this level of performance does not come cheap. If you do not take proper care of your iLife vacuum cleaner, there is a possibility that you may cause it to get damaged or that it will become obsolete before its expected lifespan.

Clogged hoses, overheated motors, and worn-out components are the three most typical problems that occur with iLife vacuum cleaners. These difficulties prohibit your vacuum from picking up all of the dirt, hair, and other debris that is present in your house.

iLife Vacuum Troubleshooting

1. The Belt is Broken

If your vacuum cleaner belt is broken, don’t worry! Changing it out for a new one is easy. Be sure you have a screwdriver handy before you get started and then follow these steps:

• Make sure the power has been turned off. This can be done by flipping the switch on top of the machine that says Power. You will also want to unplug it from any wall outlets or power cords that are nearby.
• Remove the screws from around the edge of your current belt cover. The cover should come right off once the screws are removed.
• Next, remove the screws holding in your old belt (make sure not to throw them away!). Once they’re removed, carefully slide out the old belt and replace it with a new one. To make this process easier, try sliding in one end of the new belt at a time rather than trying to fit it all in at once like before. Slide both ends into place until you hear them click back into place.

2. No Suction

If you’ve noticed that your iLife is not suctioning as well as it used to, there are a few different causes for this problem. Sometimes these causes can be easily remedied, so before you throw in the towel and buy a new vacuum cleaner, make sure you try out some of these solutions first. First, check your filters to see if they’re dirty or clogged with pet hair.

If they’re dirty, change them and see if the suction improves; if they’re clogged with pet hair, use the hose attachment to remove any obstructions. Second, inspect all hoses or connections to ensure they aren’t kinked or crimped. Third, if you haven’t replaced the belt in a while, do so now. Lastly, make sure the brush roll isn’t jammed with debris. You might need to detach it from the vacuum and manually clean it off using an air compressor’s blow nozzle or by using compressed air through an adapter on your car’s tire pump.

3. The Electric Cord Gets Tangled

As a result of this problem, your vacuum cleaner is completely unusable and needs to be unplugged and replugged every time you want to use it. Unfortunately, this isn’t an easy fix. While most people are tempted to cut off the electric cord so that it’s no longer tangling, this is an unsafe solution and could lead to a fire or electrocution hazard.

Another option is wrapping and taping up the cord. However, this method may not work well for long and will require constant maintenance as it wears down. The best way to combat this issue is by using a power strip with a built-in electrical cord organizer or storing the vacuum cleaner in its original box. If these options aren’t available, try setting your vacuum on its side when not in use which will help prevent any additional tangles from occurring.

4. No Crevice Tool

The crevice tool is a very useful piece of equipment when it comes to getting into those hard-to-reach areas and cleaning up small messes. It is small enough that you can keep it in your vehicle or toolbox for occasions when it is needed, but large enough so that you can get into almost any nook or cranny.

The dusting brush attachment should also be included in your inventory of must-have attachments. Use this brush on light furniture and curtains to remove dust, pet hair, dander, etc. In addition to these two tools, there are many others that come with a vacuum cleaner purchase or may be purchased separately.

5. Cleaning Robot Is Not Charging

If your robot won’t charge, check the power input by plugging in a different appliance. If nothing else, check that you have plugged it into a working outlet. If you still can’t get your vacuum cleaner to work, then check for clogs in the vacuum cleaner. If there are any, unclog them using an attachment and try turning it on again!

6. A Wire Is Damaged Inside the Vacuum

If you’ve found that your vacuum is sucking air instead of dirt, it might be time for a repair. This issue can be caused by several different problems, including a damaged wire inside the vacuum. Follow these instructions for repairing a cut or pulled wire in an iLife vacuum cleaner:

• Open the lid on your iLife vacuum cleaner and remove any detachable hoses from its hose port.
• Disconnect the power source from the unit.
• Unscrew the cover plate from the top of the motor, exposing wires.
• Locate the broken wire and check for signs of damage such as scorching around exposed metal strands, frayed insulation near where the wire exits the motor casing, etc.
• Cut out any damaged insulation surrounding wiring strand(s) with a sharp blade (a utility knife works well). Make sure not to cut into the actual wiring strand. Then strip about 1⁄4 inch of the outermost layer of insulation off the end of each strand, making sure to keep track of which wire goes where.
• Solder one new piece of wire onto each original strand. To do this, make a loop at one end and heat up both loops together with a flame until they’re fully joined together. Then use electrical tape to secure them in place and insulate them against possible future contact with other wires or hot surfaces.