One of the most distinguishable features inside a refrigerator is the light bulb that turns on as soon as you open the fridge. The light bulb is installed to make sure that all the contents inside the fridge are clearly visible.
But what happens if you notice the light bulb suddenly stops working? At times like these, you need to know how you can troubleshoot the issue and get the light bulb to start working again. Through this article, we will be listing all the possible reasons why your GE refrigerator light bulb is not working. Here are all of them mentioned below:
How to Fix GE Refrigerator Light Bulb Not Working?
- Resetting the Refrigerator
Appliances like refrigerators can often times malfunction on their own. Especially when you keep these appliances turned on at all times, they may start acting up. In such cases, the fastest way you can troubleshoot any given problem is by resetting the appliance.
Luckily, resetting the GE refrigerator is quite as same as making it go through a complete power cycle. In other words, you will have to turn off your refrigerator by plugging out the power source. Ensure that you keep the appliance turned off for at least 30 seconds. This will successfully restart the whole system as soon as you turn it back on.
- Defective Light Socket
You might be dealing with a faulty or defective light socket. However, before you jump to any conclusions, it is important that you try and test the socket yourself. Make sure you have access to a multimeter.
Likewise, using the multimeter, check if the socket is getting any power at all. If it does, and the light bulb still won’t light up, then you may need to replace the socket.
- Door Switch
Apart from the light socket, it is vital that you test out the door switch as well. As this switch is responsible for letting the refrigerator know that it is opened. Just like you did with the switch, you can also make use of a multimeter to inspect the continuity.
If you aren’t getting any signs of continuity then you will have to replace the door switch. Else, the problem may be something else entirely.
- Light Bulb Issue
If you have successfully tested the above-mentioned components but weren’t able to find anything, then there’s a good chance that you might have a defective light bulb. Even though it is quite rare to damage the light bulb, we have still seen plenty of cases in the past suggesting that it might as well be the reason.
Unfortunately, if you do have a faulty bulb, then there is nothing that you can do about it except get it replaced with a newer working one. Even if you did somehow manage to repair the light bulb, it may start acting up again, which is why we recommend that you opt for a full replacement instead.
- Light Switch
The final component that you should check is the light switch and the light board. Through a multimeter, all you need to do is to check for continuity. If the light switch does not give you any readings, then you know what component you will need to replace.
In the same way, you will have to check if the board is receiving the correct voltage. If it does, then you may have to replace the whole light board.
The Bottom Line:
Frustrated with having your light bulb not working with the GE refrigerator? Although there can be many reasons why this may happen, you can find all of them mentioned right above. So, if you were having a hard time getting to the root of the problem on your own, reading through this article should prove to be quite helpful.
For more like this, be sure to check out our other articles where we have explained how you can troubleshoot all sorts of smart appliances on your own!