6 Quick Fixes For Furbo Bark Alert Not Working

furbo bark alert not working
furbo bark alert not working

The treat dispenser is one of the biggest factors behind the popularity of the Furbo unit. As long as you’re using smaller treats with a firm structure, you won’t have to worry about any issues. Moreover, you’ll also get bark alerts on your connected devices through the Furbo unit.

These alerts are pretty convenient and help you check on the dog every time it is barking. However, some customers did mention programming bugs with the Furbo unit where it doesn’t register any input.

There is a chance that you’ll come across situations where the Furbo Bark alert is not working. The upside here is that you can rely on basic troubleshooting steps to get the Furbo unit working again.

Fixing Furbo Bark Alert Not Working

  1. Power Cycle Furbo System

While the connectivity-related complications are the primary reason why your Furbo unit is running into this issue, there is no harm in testing your luck with a quick power cycle. It will only take a few seconds, and you have to remove all power from the Furbo system for around 30 seconds.

Once the 30 seconds are up, you can resupply power to the Furbo unit and then try to engage bark alerts. This will address minor programming-related bugs with the system, and you will be able to better manage the Furbo system after that.

  1. Limit Interferences 

An excess of wireless devices in your household can also lead to the same outcome where the Furbo bark alerts won’t work with your connected device. To narrow down on this issue, try limiting the number of wireless devices between the Furbo camera and the router.

If the alerts start working after turning off the wireless devices, then you just have to find a better spot for your Furbo system. Moving it closer to the router should have a positive impact on the performance of your unit.

  1. Refresh Wi-Fi Connection

Refreshing the Wi-Fi connection is the next thing that you need to consider when the Furbo bark alerts are not coming through the mobile notifications. Restarting your router will remove network bugs, and you will secure a better connection with the Furbo system. So, make sure to restart the router or switch to a different network when the dog alerts are not working. In most situations, you won’t have to bother with more issues after this point.

  1. Check Notification Permissions

Even when everything is working perfectly, the mobile notification permissions can restrict your Furbo unit from sending alerts. So, if you’re sure that there are no network-related issues, just check the permissions by accessing app information.

You can also go to the mobile settings and then browse to Furbo application settings to access its configurations. All you need to do here is to make sure that the notification permissions are enabled. Once you enable these configurations, you can launch the application again. Hopefully, you won’t be disappointed by the app configurations.

  1. Reinstall Furbo App

An outdated application can also lead to the same situation where the Furbo system won’t send alerts. If you’ve not updated the app in a while, this is your cue to get your app to the latest version. It won’t take more than a few minutes, and if you’re already on the latest version, then try reinstalling the app. Make sure to hard reboot the mobile device after uninstalling the current Furbo application.

Once your mobile device boots up again, you can install the latest version and then test out the bark alerts again. If the issue was related to the app, it should be addressed at this stage.

  1. Reset Furbo Camera

Resetting the Furbo camera is your last option as it wipes your system clean. You won’t have any configurations left on the unit after you use a paperclip to press the reset button. Once the unit resets, you can try pairing it up with the mobile application again to check bark alerts.

On the other hand, if the issue persists even after going through all of these methods, then there is something wrong with your Furbo hardware. Make sure to engage the dealer and have him help you with the issue. That way, you can also forward a warranty claim if the unit is indeed defective.

Leave a Comment