8 Ways To Solve Floor Lamp Dimmer Switch Not Working Problem

Even though we have seen smart bulbs come a long way due to smart technology, lamps are still a great lighting option as they can help you illuminate your room in a specific way that you find more comfortable.

However, setting up and managing these dimmers can be exceptionally difficult.

Even if you have a bit of experience and know how to go through with the installation, there are just too many pointers to track when installing the dimmer.

For this reason, most of the owners prefer to hire an expert to help with the installation.

Spending a few bucks on hiring an expert will help you avoid issues with the compatibility, power supply, wiring connections, integrity of the devices, and basic controls.

So, if you’re not that short on budget and need something workable, then going with a professional might just be your only option.

Hopefully, you will not have to struggle with any issues with the dimmer switch not working, and the lights will respond accordingly. 

Floor Lamp Dimmer Switch is Not Working

Just as dimmer switches can be used to dim the lights on your bulbs, there are a number of options for dimming your lamps as well.

Unfortunately, users have been complaining about their dimmer switch not working with their floor lamps. As a result, these users are frustrated with the fact that they can’t really dim their lamp’s light.

Through this article, we will be taking an in-depth look at the issue in order to learn more about the possible reasons which may cause such an issue.

We will also be giving you all the troubleshooting steps required to fix these issues. So, here are all of them mentioned down below:

1. Ensure Bulb is Compatible with Dimmer

One of the first and most common reasons which could cause your dimmer to not have been working properly with your bulb is probably the fact that your bulb simply does not support the feature of dimming.

This is why we recommend you check the model of the bulb that you have installed on your lamp.

What you will need to do is to make sure that you are, in fact, using a bulb that is fully compatible with the dimmer switch that you are using.

2. Dimmer Not Installed Properly

Another possible reason for the dimmer not to have been working properly with your lights could be that your dimmer switches are not being properly installed with your lights.

Chances are that the dimmer switch is just not correctly connected to the lights that you are trying to dim.

In this case, what you have to do is to make sure that you install the dimmer switch properly. Ensure there is no loose connection or any such issue of the sort.

3. Check Power Supply

Checking the power supply from the main source is also a good method to isolate issues with the dimmer not working.

Sometimes, when the power supply is too much or too little, you will run into these complications.

The issue here is not with the dimmer or the wiring cluster.

Instead, you need to figure out the situation to the insufficient power supply from the main source, and you can try using a different power source to further improve your understanding of the situation.

Usually, when the power supply is too much, the dimmer will start buzzing.

Similarly, when the power supply is too little, you will notice that the lighting from the system is minimal, and there isn’t a decent response at the lower configurations. 

In either case, you will have to figure out how to adjust the power supply. If the issue is on your end, you need to call in a technician to help fix the power connections.

Trying to fix them yourself will only put you at risk of electrocuting. So, try to keep yourself on the safer end as you’re stuck in these errors.

Ideally, having the power connections serviced at least once every year will help you avoid the majority of these errors.

So, try and spare some cash to hire an expert. This expense might just save you from thousands of dollars of loss, and you will notice a better response from all of your appliances.

Lastly, a great method of adding an additional layer of protection is to rely on a power stabilizer.

This is especially true if you experience frequent power cuts. So, be sure to have a power stabilizer in play and then seek help from a professional to guide you accordingly. 

4. Fix Wiring

At this point, you should also take a peek at the wiring side of things to further isolate the issue.

There is a good chance that you’re struggling with wiring errors, and fixing them can be a bit complicated to say the least. So, if you’re also stuck, be sure to check up on the wiring.

If you find that the wiring is damaged or frayed, or in poor shape, be sure to replace them immediate.

Better yet, have a professional do that for you. There is no point in risking your safety over a few bucks, and you will be able to get through the issue more quickly that way.

Once you’re through these errors, it will not take you more than a few minutes to adjust and address these complications.

So, all that you need to do here is to fix the wiring side of things and then check up on the load when trying to get a good enough response from the dimmer.

5. Limit Load On The Circuit

It is also possible that the load on the circuit is too much. Sometimes, when the load on the same circuit is too extensive and you have many devices installed on the same system, then it can lead to these errors.

This is especially true if you’re working with some heating systems in the room.

So, if you’re in this situation, a good thing here would be to limit the load on the circuit.

You can do that pretty easily by taking some devices away from the same circuit and then checking up on the performance side of things.

Nine times out of ten you will have sorted with these errors, and you will not have to deal with more complications on your end.

It all comes down to how you’re planning to adjusting these situations and having an expert help you through these errors is not that bad of an idea. 

6. Check For Water Damage

Next, you need to also check for water damage. While it is not that common for water intrusion to make its way near switches, the possibility is always there.

So, you need to check for discolored sections and rough patches to isolate this possibility.

If you do find there to be water damage, then there is no point in using the dimmer. It might already be damaged.

Sadly, trying to dry it out or having it work one more time is not that good of an option. So, you will have to seek help from the dealer by forwarding a claim.

That way, you will not have to go through the hassle of fixing a damaged dimmer, and the dealer will take charge of the situation.

Similarly, you can follow though the pointers below, if the dimmer was damaged out of the box. 

7. Faulty Dimmer Switch

The last possible reason why you are having trouble using the dimmer switch could have something to do with the dimmer switch itself.

More specifically, it could be that you are currently using a faulty dimmer switch. If that is so, then you will have to replace the dimmer switch with a new working and reliable dimmer switch.

8. The Bottom Line:

Here are the different ways you can fix the floor lamp dimmer switch not working.

Ensure that you go through all the instructions that we have mentioned in the article. Hopefully, you’ll be sorted in no time and won’t have to deal with these complications again.

Also, if you find none of the steps to be helping at all, you should try contacting the support team or getting it checked by a professional.

That way, you will not have to spend hours of your time trying to adjust the unit, and an expert from the official support team will make your life much easier.

So, be sure to reach out, list the issues on your end, and then wait for a response from the official support.

It can take a while for them to respond, but they will surely guide you through a fix. However, if you purchased the dimmer from a cheap and off-brand option, you might just be stuck with this unit.

There aren’t any other fixes at this point, and you will have to seek help from the professionals when it comes to addressing errors with the hardware as well.

The warranty claim is one of your best moves when you get a defective dimmer out of the box. Ideally, that will sort you out here.