The motion sensors are pretty great when it comes to managing the efficiency of a smart lighting system. However, it can be a bit hard for owners to initially set up these motion sensors and basic issues are pretty common with these sensors. So, you’ll likely have a hard time trying to manage the motion sensors installed in your household.
It is pretty common to see owners struggling with Flood Light motion sensors not working. There are a ton of variables that can play a role in this situation. Luckily, some basic troubleshooting steps mentioned here should improve your situation with the Flood Light motion sensors not working.
Why Is Flood Light Motion Sensor Not Working?
- Clean Sensors
Over time excessive dirt and debris can build up on the motion sensors and create issues with their performance. So, if the sensors were working perfectly just a few days ago, it is possible that you’re in the same situation. Luckily, all you need to do is to clean the dust on these sensors and then check their performance over the next day. Ideally, the problem with the Flood Light motion sensor not working should be fixed after cleaning the sensors, and you won’t have to bother with more solutions.
- Temporarily Remove Power
Sometimes minor bugs with the programming can lead to a similar situation. Owners have said that power cycling the lighting system along with the sensors eliminates these programming-related issues. So, you should follow the same method and remove the power by breaking the circuit from the main panel. This won’t take more than a few minutes, and you need to leave the power out for around an hour. After that, use the circuit breaker to resupply power, and that will eliminate performance issues.
- Adjust Sensor Range
The sensor range plays a massive role in determining the performance of the lights. If you’ve just installed the sensors and they won’t engage the floodlights, then you need to slightly increase the range on the sensors. That should help you get the desired performance from the floodlights. So, just open up the smart app and increase the covered section on the smart sensors. Now, you just have to test out the performance during the night and how the sensors react to movement within the covered range.
- Check Sensitivity
Motion detection sensitivity is another crucial variable that impacts the level of movement recorded by the sensors. So, if you’re sure that the motion detection range is set to max, increasing the sensitivity by a small margin will help you fix the system. Make sure not to make the sensors too sensitive, or you’ll be dealing with too many false inputs, and the Flood Light will keep turning on even when there is an animal outside your house during the night.
- Remove Obstructions
While it is clearly mentioned in the installation instructions that you need to clear up all obstructions ahead of the sensors, it is still pretty common for users to account for these issues. SO, you’ll often see customers struggling with the same issue because the sensor was blocked out by obstructions. The only thing you can do here is to remove the obstructions ahead of the sensor and make sure that the covered area is clearly visible from the position of the sensor.
Similarly, you should also try to call the customer support department of the brand you’re using. The professionals from customer support will help you find a good spot for the sensors, and you won’t have to worry about performance issues as long as the sensors are kept clean and away from obstructions.
- Reset Motion Sensors
Resetting the motion sensors should always be the last choice as you’ll have to start everything from scratch. It can be a bit time-consuming, and you should try to exhaust other options before spending time resetting these sensors. That way, you won’t have to bother with initial configurations.
However, if you’re sure that none of the above-mentioned methods apply to your situation, then resetting the sensors is your best bet. There is a decent chance that your sensors will start working after the reset is complete, but if you’re unlucky, then call up the dealer and claim a warranty.