The performance of your HVAC system is directly related to the quality of air filters installed in your house. You’ll find many owners shifting towards the use of smart filters like the Filtrete Furnace filters. These are pretty easy to install and can be paired up with your mobile device to keep you updated about the filter performance.
The vast majority of the customers have had an amazing time with the Filtrete Furnace filters, but there have been a few issues recently regarding this filter not allowing enough air through. If you’re getting similar problems from your Filtrete unit, then there is a good chance that you messed up the installation. So, go through some of these methods to get everything in order.
Fixing Filtrete Furnace Filter Not Allowing Enough Air Through:
- Check Installation
Before anything else, you need to check the installation status of your air filter. There is a good chance that you didn’t follow the instructions correctly, and the air filter is not installed properly on your unit.
So, you should simply remove the filter from the duct and then install it one more time. If you’re sure that you bought the right type of filter, just point the sensor towards the blower and fix the filter in its position. Hopefully, you won’t have to worry about blocked air flow again.
- The Duct Might Be Damaged
Sometimes, it is the air duct that is damaged, and there isn’t anything wrong with your filter. So, if your HVAC system is in rough condition, now is a good time to hire an expert to take a look at the air conditioning unit. There might be a damaged section in your duct that is allowing the air to escape. This will create reduced airflow as the air will just flow out the sides of the damaged section.
- Remove Plastic Packaging
It is also possible that the plastic packaging got stuck to the filter and is blocking the air from flowing properly through the unit. You need to make sure that both sides of the filter are clean and that there is no packaging left on either side. Otherwise, the airflow will get blocked even when the air filter is in fresh condition. So, take out the filter, and check both sides one more time before reinstalling the filter.
- Check For Compatibility Issues
Even when everything is managed appropriately and there is nothing wrong with the installation, you can run into the same issues while using the wrong type of filter. So, if you didn’t check the compatibility of the filter with your furnace, try asking an expert from the official support team. There might be some compatibility issues, and the airflow is not going through the filter properly. The dealer will guide you through the issue, and you won’t have to waste further time trying to fix the unit.
- Remove Obstructions
At this stage, you need to further check the duct as well as the vent for possible obstructions. Make sure that the blower is in good shape and that nothing is blocking the flow of air in the duct. If the blower is in poor condition, it won’t be able to generate the necessary air pressure, and you won’t get enough air through the filter. So, make sure that the issue is not related to the blower or the poor condition of your duct. That way, you won’t have to purchase a different filter.
- It’s Time For A Replacement
However, if you don’t get anywhere even after going through all of these fixes, then you might be dealing with a defective filter. Even the new filters can be damaged, and you should try reaching out to the dealer regarding a replacement. If the warranty is still valid, you won’t have to go through much trouble to get a new filter for your furnace.
Overall, the issue is mostly related to the installation of the unit, and you might also be able to fix the issue after reinstalling the filter. But if the issue persists even after testing out all of these methods, then the only option left is to get a replacement by claiming the warranty. Hopefully, you won’t have to wait long to get a new unit.