Being unable to pair your smart locks to Bluetooth can be quite a hassle. Speaking of which, users have registered plenty of complaints regarding the Eufy smart lock not connecting to Bluetooth.
Even though there are numerous reasons why you may face connectivity issues, there is still a good chance that you can get them fixed. This brings us to today’s topic where we will be sharing some of the most effective solutions that can help you solve the connectivity problems related to the Eufy smart lock.
Troubleshooting Eufy Smart Lock Not Connecting To Bluetooth
- Bluetooth Out Of Range
The first thing that you need to check is the range of your Bluetooth. The Bluetooth can be connected to the device from a certain range only. You might face problems with the Bluetooth connection if the smart lock is out of the range of your Bluetooth.
Therefore, ensure the distance between the smart lock and the Bluetooth lies in between the required range. If not, then it is suggested to move the Bluetooth device close to the Eufy smart lock.
- Turn On Bluetooth Settings
As simple as it sounds, there is a good chance that you might not have Bluetooth enabled on your device. If that is the case, then you will just need to turn on Bluetooth through your phone’s settings.
To do this, go to the settings and click on Bluetooth, then make sure that the switch is turned on. Alternatively, you can just swipe down on your phone and open the top menu bar where you should have the option to enable/disable Bluetooth.
- Ensure Location is Turned On
There’s a possibility that you might have the location service disabled on your phone. If that is so, then all you need to do is to go to your phone’s settings and make sure that you enable it.
- Check The Inside Cable
It is also possible that the inside cable is the culprit of your problem. If the inside cable is not plugged in all the way, it will not allow the Eufy smart lock to connect to the Wi-Fi.
So, make sure that the cable is connected to the smart lock correctly.
- Reboot Your Lock
If none of the above-mentioned solutions work for you, the last thing that you can do is reboot the smart plug. You can also try making it go through a complete power cycle. For this purpose, you will have to keep your device turned off by unplugging it from the power source for more than 30 seconds.
Afterward, you can attempt to plug your device back into its power source and try turning it on. It should start working again. If it does not, then you can try referring to support for further help.