Eufy Doorbell Won’t Stop Ringing: 3 Ways To Fix

Eufy Doorbells are smart Doorbells that are connected to your Wi-Fi, and you have better control over them with your mobile phone no matter where you are.

These units can be considered the next best thing after Ring, and the price point is also pretty reasonable here.

These doorbells also have a ringer that you can install inside your place and that works like a traditional doorbell to alert you whenever someone presses the button on the doorbell.

Moreover, the installation is not that hard if you have a bit of knowledge on how to go about pairing smart units.

However, if you’re not that sure about the pairing routine and the chime is not responding well to the unit, then you can hire an expert.

That way, you will be able to avoid all of the intricate details associated with the setup, and fixing the unit will come easily to you.

With that said, this unit works great most of the time, but you might also experience some issues from time to time like the doorbell won’t stop ringing.

These issues can surely be annoying, and you will have to do a bit of troubleshooting to fix them accordingly. Here are a few things that you need to do.

Eufy Doorbell Won’t Stop Ringing

1) Restart the Doorbell

Luckily, restarting won’t cost you anything as it will just reboot the components on any device, including the doorbell, and you will be able to fix tens of problems through it.

Restarting is pretty simple, and all you need to do is power off your doorbell through your smartphone device.

This way, you won’t have to plug out the doorbell either if it is hardwired, and things will become easier for you. Once you have turned it off, turn it back on after a while, and the problem will most likely be solved after this.

2) Check the Button

If the doorbell doesn’t stop ringing after someone has pressed the button on it, that would mean that your button might have some residue on it, like dust or humidity, that can get it stuck in the position, and your Eufy Doorbell will keep ringing. 

So, to fix that, press that button once sharply, and you will get an idea if it is getting stuck.

Clean the button with some proper cleaner that is used for devices such as CTC or alcohol. This will most likely solve the issue for you, and the button will stop getting stuck after that.

If you are unable to make it work and you feel like something might be broken inside the button that can cause your doorbell to keep ringing after it is being pressed, you will need to take it to the Eufy support center, and they will be able to diagnose the button problems properly.

There can be different issues, such as the button might be broken inside or some issues with the logic board.

Having a proper diagnosis will allow the techs to fix the problem with a repair or replacement, and you can install the doorbell again outside the door that you want.

3) Check the Wiring

Now, there is also some chance that your wiring might not be working as it is supposed to due to short circuits, inappropriate wiring, or humidity.

If the doorbell is hung outside under severe weather conditions, the doorbell will not stop ringing.

This issue is common with such doorbells, and you will need to have an experienced electrician check the wiring for both the doorbell and the ringer for you.

Once they have checked the wiring, you can have a better idea of the problem, and they will be able to fix it efficiently, so you don’t have to face issues like this again.

4) Adjust Motion Detection

The motion detection features can be pretty hard to manage for first-time owners.

You still struggle with these features when you’re not that sure about the sensitivity side of things. So, if you have just installed the unit and it will keep ringing, the motion detection features might get engaged.

While the ringing issue is not always directly related to these features, it is still a good option to narrow down these issues.

All that you need to do is to access the sensitivity settings and then go about decreasing the sensitivity.

However, only decrease the sensitivity by a small margin if you’re aiming for a robust response from the unit.

Otherwise, you will have to deal with a few more errors down the road, and fixing the unit will be a bit more challenging, to say the least.

After you’ve found the sweet spot where you don’t have to worry about false alerts, just clean up the lens.

Sometimes, blasting the unit with compressed air is a good idea, and that will get rid of the debris and anything else that might clog up the unit.

Ideally, you will notice a much better response from the doorbell at this stage and won’t have to deal with the same complications when it comes to setting up the smart unit.

So, be sure to keep all of these pointers in mind when you’re aiming for a decent response. 

5) Check For Water Damage

Issues with water damage or exposure to excessive moisture can also lead to this situation.

The moisture can impact the wiring condition, and the connection points will develop rust on them to restrict the power flow.

This will also give rise to erratic behavior from the unit, and you will not be able to secure a robust enough response out of the unit.

So, if you’re in the same boat and the unit won’t respond well to your input, just call in an expert. 

He will help you check up on the wiring connections, and you can get rid of the damaged wires or clean up the contact points to limit these issues.

Having an expert help you here will make your life much easier, and you will not have to worry about electrocuting yourself.

So, be sure to call a local contractor or a technician. He will take a peek at your status and then guide you on how to tackle these issues.

Most of the time, the effort that you’ll have to put into these fixes will be negligible, and a bit of cash will have you sorted out. 

6) A Reset Might Help

Next, you need to also go about the reset routine and check up on the unit accordingly.

This will help you address issues with the programming side of things. However, the downside here is that you will end up losing all of the configurations from the unit.

So, if you’re in the same boat and can’t seem to make your way through a fix, you will have to get rid of all the stored settings. Sadly, there are no other pointers left at this stage.

Once you’re through with the reset, you can spend the time setting up the unit from scratch. It will take a bit of time, but you’re sure to get a robust enough response out of the unit after the reset is complete.

Hopefully, you will be sorted at this stage and won’t have to worry about more complications.

7) Call Eufy Support

Most of the time, getting help from Eufy support is not a bad idea. You just have to explain your end to the dealer, and they will be more than happy to take charge of the situation.

Similarly, you can also reach out to the official support team, and they will guide you accordingly. 

All that you need to do is to explain your end and then wait for pointers from the experts. They will take a bit of time to respond, but you’ll surely get positive feedback here.

Once these experts have a good grasp of the situation, you just have to follow along with their pointers, and they will guide you on how to best tackle these errors.

Hopefully, that will be it if your device is not defective.

On the other hand, if the device is defective, then the only card left to play is to reach out to the dealer for a new piece by claiming the warranty.

If your claim is valid, you should be able to secure a fresh piece within the same day.

Wrapping Up

These were some details on how you can go about getting a fresh piece from the dealer.

Most of the time, the issue is related to the programming side of things, and you should just power cycle the unit and go through the basic troubleshooting routine.

However, if you’re not that lucky, then the next thing to do is to check up on the stored configurations and try resetting the system.

That will most likely have you sorted, and you can go about the configuration from scratch. 

Lastly, you should also involve the experts working on the support channel, and they will save you a lot of hassle down the road.