Eufy baby monitor is a great way to keep an eye on your baby while you are doing work or house chores.
The Eufy baby monitor is designed in to provide amazing performance and consistent response to the owners.
In addition, it comes with an extra wide-angle lens that helps the parents with better view options.
Eufy has always dominated the security market with its phenomenal cameras and comprehensive surveillance systems.
The same statement is true for baby monitors, and you’ll get amazing performance from this system as long as you set it up correctly.
Luckily, the basic procedure offered by this unit doesn’t require any expert knowledge, and you will be able to get through the setup yourself.
Eufy Baby Monitor Sound Not Working
All it takes is a bit of effort on your end, and you will be able to fly through the process.
With that said, it can be quite dangerous when such devices do not work properly, as it exposes your baby out there.
If your Eufy baby monitor sound is also not working, then here is what you need to do about it.
- Do The Reset On The Units
There can be various reasons for the Eufy baby monitor causing sound problems. Most of the time, a reset of the device will help get rid of the problem.
Therefore, the first thing you should do is reset the Eufy baby monitor. It is recommended that you should do a reset on both units.
Keep in mind that going with a reset is like using a double-edged sword.
There is no debate that a quick reset can help you fix the majority of programming errors with the unit, but you will also lose all configurations. So, that is one thing to consider.
However, the simple setup routine offered by Eufy will help you fly through the setup. So, be sure to reset everything back to factory settings and set up the system one more time.
It will barely take a few seconds as you’re trying to configure your unit.
- Long Distance Between The Units
The sound problem can also be caused by the long distance between the baby unit and the parent’s unit, as it results in weak signals between the two units.
Due to this reason, some measures need to be taken while using the baby monitor.
The first thing you need to keep in mind is that the two units should not be away from each other more than one meter apart.
The second measure that needs to be taken care of is to ensure that there is no obstacle in the way of the two units that might change the frequency.
- Loose Connection To The Speaker
Another possible culprit of your problem can be a loose connection to the speaker. Such problems can be caused by the careless handling of the device.
This is because it can cause the components of the units to be distracted from their original place. However, such issues can be easily resolved after some small fixing.
- Unscrew the baby monitor and remove the batteries.
- You will find another screw. Remove it from the unit.
- Open the body, and you will find two wires near the power button that leads to the speaker.
- Once the wires are detected, place the battery in the unit, increase the volume, and use a dryer to heat the speaker.
- While doing so, move the wires toward the speaker.
- When you hear the dryer noise coming out of the speaker, screw the device back into its original form.
- Check Speaker Output From App
Sometimes, all that you will have to do is to check whether or not the speakers are enabled through the application.
It is not that rare for users to miss this one detail, and you might be in the same situation. So, you just have to go over to the camera and then the audio settings.
From there, you will find the speaker configurations and you can enable the speaker as well as turn up the volume to the max.
From there, fixing the unit should come easy, and you will not have to bother with more errors down the road.
It all comes down to how you’re planning on adjusting the system.
If there seem to be no hardware issues and you believe that you programmed it perfectly, then a quick peek at the configurations will do the job.
Hopefully, you won’t have to go through any more troubleshooting steps to fix the unit, and it will start working perfectly.
- Try Power Cycling The Device
While most people believe the power cycling method to be pretty basic and elementary, it did help countless owners get ahead of audio bugs.
So, if you can’t seem to figure out the issue with the unit at this stage, there is no harm in power cycling the device.
This doesn’t mean that you can turn off the camera and then turn it back on. Instead, you will have to remove all power form the unit and keep the power isolated for about 20 minutes.
From there, you can connect the power connections again and then check for audio issues.
Allow the unit to turn on for a few seconds and then access the application. Nine times out of ten, you will have access to audio and won’t have to deal with more bugs down the road.
However, if that is not the case for you, then the probability of hardware issues increases by a huge margin.
The only thing that you can do about hardware issues is to get your hands on a fresh device. There is no point in trying to fix a damaged unit, and you will have to get a new one.
However, there is still one more thing that you can check before declaring the unit to be faulty.
- Limit Interferences
Most of the time, you will not check for interference in the room. It might seem like an obscure issue, but it is an issue nonetheless.
This is especially true for owners that have installed countless units in the same room.
So, if you have many smart units, wireless accessories, and similar devices installed in the room, it is a good idea to turn them off.
You need to remove power from these devices and then try accessing your baby monitor one more time.
If that fixes the audio issues, then you will be sure that the interferences are to blame here.
This issue is more serious for owners that have an entire ecosystem of smart units installed in the same house. So, you’ll have to navigate the issue accordingly.
The easiest method would be to just get rid of the smart units and don’t bother with the devices again.
However, if you don’t wish to do just that, then you will have to get an extension for the router. Installing these devices on the extension will be more than enough to help you limit the signal errors.
Lastly, you can also move the devices closer to each other to improve the signal strength. It all comes down to how you wish to proceed in this situation.
Your only focus should be on improving the quality of sound from the unit by increasing the signal strength.
- Faulty Parents Unit
It is also possible that the problem is with the parent’s unit. The first thing you can check on the parent unit is the batteries.
Make sure that the batteries are properly intact. Secondly, ensure the speaker’s connection.
If the speaker is faulty, replace the speaker with a new one. This can be easily done by unscrewing the unit, removing the speaker wires from the old speaker, and finally connecting it with the new one.
Wrapping Up
The only reason why so many parents trust the Eufy baby monitors is because of their consistency and quality.
You won’t find a better unit on the market, and this device will keep you served for years to come. However, even the best devices can run into some snags at times.
Luckily, the issues with the sound not working when using the Baby monitor are not that serious.
Half the time, owners forget to turn up the volume, and you need to switch it up to max to get a response from the unit.
From there, you can also check up on the configurations and the hardware status.
As long as the issue is related to the programming side of things, you will have an effortless time with the system.
However, we cannot say the same if there are hardware issues with the system. You will have to get a replacement, and that can be done pretty easily by contacting the dealer.
This is especially true if the unit got damaged during delivery. You will not be held responsible for delivery, and you can demand a fresh piece from the dealer.
He will go through the verification routine, and once everything is clear, you will be able to put your hands on the fresh piece within the same week.