The touch technology offered by Delta Faucet brings an increased level of convenience to the users. You can avoid a lot of mess by simply touching the faucet in any section, and that would start or stop the flow of water. The only tough thing about this faucet is the installation process, and you will most probably have to hire an expert to help you install the unit.
Installation issues with the Delta Faucet Touch can lead to problems with the water flow and a ton of other issues. So, you shouldn’t focus on saving a few bucks on the installation. Here is a list of potential issues that you will avoid by seeking help from an expert.
Fixing Delta Faucet Touch Problems
- No Water from Faucet
The first issue that you will be dealing with is no water coming from the system. From defective wiring to improper installation of the faucet, a lot of factors can contribute to this problem. So, it will take some time to check the system thoroughly.
If you’re sure that there are no problems with the power status, double-check the water connections and the main supply line. You’ll surely find issues with the water supply, and fixing the mainline should streamline the water.
- Clogging Problems
Blockages in the main system are pretty common when you don’t have any type of filters linked with the faucet. Similarly, if the water pressure is too low, the system will run into issues with little to no water coming from the faucet.
To fix this issue, you will either need to hook up a filter with your mainline or increase the overall water pressure. Other than that, there isn’t much that can be done about this problem.
- Loose Connections
There aren’t too many good reviews about the quality of connections on this unit. You’ll surely find customers complaining about the wiring management and constant issues with the loose connections. These issues are more common for owners who try to install the unit themselves.
So, if you’re in a similar situation, just hire an expert to help with the wiring management. That way, you won’t be dealing with the same issues again, and the faucet will keep working.
- Defective LED
The LED on your touch faucet is primarily meant to guide you through the current status of the system. It keeps you updated with the battery levels and the daily operations. However, some owners have been struggling to get the LED to work even though the water is coming perfectly from the faucet. So, if you’re also getting no response from the LED, try to fix the issue by checking the wiring connections.
If the wiring connections are secured properly, you will need to source an LED replacement for your Delta Faucet. Calling the experts is your best bet, and claiming the warranty will help you get a replacement for free. So, if your purchase was recent, just reach out to the experts, and they will help you with the defective LED.
- Solenoid Issues
The power in your system can be linked with the proper functioning of the solenoid. If there is no power in the system and the battery is in good shape, then you will need to check the status of the solenoid. You will either find faults with the orientation of the solenoid, or it will be defective.
So, depending upon the status of the solenoid, you can either secure the terminals or move towards replacing it entirely. That will eliminate all the power issues, and the system will start to work perfectly.
- Touch Region Not Working
Sometimes, you will also run into problems with the touch region. This issue can be linked with wiring management and interference with other metal objects. So, if you have put anything metallic near the faucet, then removing these interferences is the best thing that you can do.
All of these problems can be linked directly with the installation of the unit. So, you will massively improve your chances of securing consistent performance by having a professional help you with the installation. It will cost you a bit but when you consider the long-term impact, hiring an expert is always the better option.