7 Steps To Fixing Deebot Laser Distance Sensor Is Blocked? (Answered)

The more compact models from Deebot cab provide a budget solution to your cleaning needs. These robots are not the cheapest, but you can consider them the most reliable cleaning units while talking about the price point.

So, if you’re not that thrilled about spending thousands of dollars on a new cleaning robot, then Deebot is the choice for you.

Usually, you won’t have to worry about a thing with Deebot as long as you keep it in good shape. However, if you ignore maintenance for an extended period, then issues like the Deebot Laser sensor being blocked are pretty common.

So, here are some quick fixes that can help you with this situation.

Deebot Laser Distance Sensor Is Blocked?

1. Remove Dust

The issue with the Deebot Laser Distance Sensor being blocked is always related to the presence of excessive dirt and hair in the section.

So, you need to either use a vacuum cleaner to suck the dirt or a blower to free up the sensor. You won’t be able to access the compartment with your finger, and some users have had success with the eraser end of a pencil.

Ideally, the sensor will start working once you remove the excess dirt from the system.

2. Manually Spin The Sensor

Sometimes, all that the sensor needs is a nudge in the right direction. If the Deebot laser distance sensor does come on but is not rotating, then gently spinning the sensor will help you get ahead of this error.

However, you should avoid the use of excessive force and stick with minimal input. Otherwise, you can damage the sensor, and the belt might come off of the rotating sensor. So, just spin the laser sensor and check the performance of the Deebot.

3. Replace Broken Belt

A broken belt also has a role to play in this situation, with the Laser Distance Sensor being blocked in the Deebot. The only fix for a broken belt is to replace this belt.

However, you will have to open up the Deebot completely to access and clean the laser distance sensor. Customers have said that replacing the broken section with a rubber band is a good method of removing the issue.

So, you can also try your luck with a rubber band, and that will be enough to help you with this issue.

4. Check Motor

It is also possible that the motor rotating the sensor is broken, and you will have to check the power connections to the motor to get everything working again. Usually, you will just be dealing with a loose connection point.

So, open up the Deebot and check the connection points for the installed motor. In most cases, the problem will be fixed once you tighten up the wiring installed on the motor. However, if the motor is defective, then installing a replacement is the only real option here.

5. Restart Deebot

Restarting the Deebot might seem like a basic fix, but it has helped several customers fix the laser distance sensor issue. So, there is no harm in restarting the bot by holding down the power button and then engaging the unit again.

This should be enough if you’re sure that the sensor area is clean and the motor, along with the belt, is in good shape. Once the bot restarts, you can test out the operations again, and there is a good chance that your sensor will work without further complications.

6. Factory Reset your Deebot

Your last shot at fixing the unit without calling expert support is to reset the device back to factory settings. However, you should always make sure that there are no hardware issues with the unit.

It might not be too common for Deebot to run into programming issues, but the possibility is there. So, to isolate the issue, you need to follow through with the reset routine.

This will wipe away all the stored configurations. You will have to set up the unit from scratch. However, you’re not left with other options at this stage. The reset routine can vary depending upon the Deebot model you’re using.

So, make sure to access the owner’s manual to find the right instructions. It will take a few minutes for the unit to boot back up after the reset. Just be patient and then follow through with the setup.

7. Warranty

On the off chance that your laser distance sensor issue is not fixed at this point, then claiming the warranty is the last option left. You’re dealing with a defective board, and the only real way of getting around this situation is to call the experts for help.

Even if you’re not sitting on a valid warranty, you will have the best chance of taking the Deebot to a repair center. So, depending upon the warranty status, you can either call up customer support or go to a repair center.

In the majority of situations, cleaning the dust is the best solution for the Deebot Laser Distance Sensor being blocked. So, there is a good chance that you won’t have to bother with checking the motor or the belt, and the issue will be fixed once the dust is removed.

Should You Really Purchase A Deebot?

When owners run into issues with their smart robots, they often ask themselves whether or not these devices are viable for their homes. However, the robot is not to blame for the majority of these issues.

If you ignore the maintenance requirements, even the best robots from Roomba and Ecovacs will malfunction.

So, Yes! You should go with Deebot and just keep track of its maintenance. Cleaning the dustbin and lightly wiping away the gunk from the sides will keep your unit in perfect shape. This might seem like a bit of a chore, but it won’t take more than 2 minutes.

There are some self-cleaning units on the market, but you will still have to maintain those as well. So, the only way to get consistent performance from the device is to follow through with maintenance cycles.

You will also notice a better cleaning performance when the robot is in good shape. With that said, Deebot is one of the best options on the market.

The reviews are pretty great, and issues like the Deebot laser sensor not working are rare. Even if you do run into this issue, you can follow the guide above to get everything in order.

On the off chance, your unit is defective, you can claim a warranty by reaching out to the official support. They will be more than happy to provide you with a fresh piece once the claim is verified. So, be sure to reach out to these experts.

After completing the verification, the dealer will help you secure a new piece. So, don’t hesitate to reach out to these professionals. Ideally, you won’t have to worry about the same errors with the new unit.

Is Deebot Viable For Carpets?

Depending upon the model you choose, this brand has got you covered with the best performance on the market. Its performance might not be as good as Roomba on carpets, but it is far better than other brands.

So, keep that in mind, and you won’t have to worry about any missed sections. However, if you can extend your budget by a small margin, Roomba will bring a 20 percent increase in the cleaning performance.

The suction power from Roomba units is a bit better. Moreover, their bulkier size will be enough to get through the thickest carpets. On the other hand, there have been a few reports of older Deebot models getting stuck on a carpet.

So, it all comes down to your budget. If you do wish to enjoy better performance from Roomba, extend your budget. You won’t regret this decision, and this brand will serve you for years.

Wrapping Up

The issues with the laser sensors can be fixed by cleaning up the sensor and spinning it with the end of a pencil. You won’t be able to access it with your finger, and you need a clean and small object to do the job. A little nudge will get everything working perfectly in no time.

However, if your robot is damaged, make sure to ask for a replacement. The warranty is at least valid for 12 months. So, if you’ve not had the unit for more than a year, then reach out to the dealer.

Overall, Deebot is a great brand, but you won’t have that great performance when compared with Roomba. This is especially true for carpeted floors. So, if your home is filled with carpets, try finding a newer Roomba model.

Hopefully, you will be able to find an option that will serve you for decades!