6 Ways You Can Fix Deebot DN622.11 Beeping

The Deebot 622.11, also referred to as the Deebot N79 in plenty of other regions is a great vacuum robot device. Although the device is designed to accommodate comfort and convenience, there are still various issues that you can end up running into while using the device.

Talking about this, many users on the internet have explained how they keep hearing a beeping sound on their Deebot DN622.11. If you have also been hearing the same beeping sound on your robot, then here are all the things that you will need to check in order to get rid of the sound.

How to Fix Deebot 622.11 Beeping?

1. Cleaning Your Deebot

In case you hear a single beep from your vacuum robot, it could be because of dirt or dust that has accumulated inside the device. However, if this is the case, then you should be able to fix this by simply cleaning your Deebot.

Using any cleaning tool or a piece of cloth, attempt to clean any dirt particle or dust that you can find around the robot. Also, make sure that you thoroughly clean the sensors as these are delicate parts of the robot which are exposed to all kinds of debris.

2. Checking the Brush and Wheels

Once you have cleaned the robot, the next thing that we recommend you do is to check the brush and wheels. Oftentimes, hair or other such particles can get stuck on these components which may result in the robot acting up.

To prevent this from happening, you will simply have to make sure that you remove them from both the brush and drive wheel. Luckily, you should have received certain cleaning tools with the robot. You can use these to easily remove such particles without any trouble.

3. Battery Offline

If you hear the beeping sound whenever you attempt to charge the device, then there’s a good chance that you might be dealing with an offline battery. More specifically, if you have not been using the robot for quite some time now, its the battery can get discharged.

When that happens, you will have to reactivate the battery by manually putting it to charge. Ensure that you charge the device 3-4 times, ensuring that you charge each time for 4 minutes. As soon as you are done, you can try normally charging the device again.

4. Checking the Charger

There’s also the possibility that your charger might have been acting up. Though if this really is the case, then you will have to make sure that you inspect your charger. Ensure that your robot is properly seated on the charging dock and that the charging contact pins are connected.

Similarly, we also suggest that you have a look at the power source as well.

5. Faulty Battery

Unfortunately at this point, you might have a faulty battery due to which you are getting a beeping sound from your Deebot. Still, we do suggest that you try checking whether your Deebot charges or not. If it doesn’t, then the only thing that you can do now is to get a full replacement of the battery.

Luckily, purchasing a new battery shouldn’t cost you that much as these are readily available.

6. Getting Help

In case the issue still seems to persist, then we strongly advise seeking help from any trusted professional. You can even call in a technician or go to any local repair shop. In either case, just make sure that you get the device thoroughly checked for any possible issues that might have been causing the beeping sound.

The Bottom Line:

Hearing a beeping sound coming out of your Deebot DN 622.11 can be pretty annoying. Even though your device can start beeping because of a number of reasons, we went ahead and mentioned some of the most common ones that you are bound to run into. So, if you are in need of a desperate fix to this particular issue, then make sure that you give the article a thorough read!