There is no debate that you can find much better lights than Daybetter LED options. However, when you match the price point of these lights with the extensive list of features, Daybetter might just be one of the most reasonable options on the market. So, if you’re interested in some budget LED lights that will last you for a few years, Daybetter is the brand for you.
Even the issues that some owners complain about are not that serious and usually can be fixed easily. So, there is no need to get concerned about a few bad reviews, and here is how you can get through the troubleshooting process for Daybetter LED lights.
Daybetter LED Lights Troubleshooting:
- Lights Not Turning On
The most common issue that users face with these lights is that they won’t turn on after you’re done with the initial installation. This problem can stem from a plethora of causes, from bad connection points to insufficient power from the source. Your best bet to narrow down the issue is to change the source.
If the LED starts working with a different power issue, then you’re just dealing with insufficient voltage from the outlet. You should seek help from a professional to fix your electrical connections while you find a functioning outlet for your LED lights.
- Remote Not Working
Sometimes, it is the remote that is behind Daybetter LED lights not responding to the input. If you’ve been using the LED lights for a while and they have just started to malfunction, then you need to get new batteries. There is a good chance that your batteries have drained out, and replacing them with fresh batteries should get the remote working perfectly once again.
- LED Lights Will Start Flickering
When the LED lights start flickering, it points towards voltage fluctuations from the source. This is more common for users that use long strands of LED strips with the power adapter. The instructions mentioned in the owner’s manual will help guide you through the recommended length relative to the output from the power adapter.
So, if the length is too much, you need to cut a few sections from the strip and connect that with the power adapter again. That should be enough to help you get through the flickering issues, and the LED light strips will start working perfectly after that is done.
- No Response From Alexa
The Daybetter LED lights are known for their compatibility with Alexa voice assistant, but that doesn’t mean you’ll always get a quick response from the unit. Minor connection bugs often present themselves as you’re trying to connect the smart device with the Alexa assistant. However, you can easily fix these connection bugs by removing the Tuya Smart Skill from the Alexa application and then adding it again.
Some owners also pointed out that they had to reconnect the Daybetter LED lights with the Tuya account one more time to address this issue. So, if simply reading the Alexa skill doesn’t help you with the responsiveness issues, then you should follow the same steps.
- Strips Not Linking Properly
A lot of customers also mentioned issues with Strips not linking properly even though they were cut cleanly through the cut marks. This issue is mostly linked to the connectors, and you will have to source new connectors for your Daybetter LED lights. The good thing here is that these connectors are pretty cheap, and it won’t impact your budget to source new LED connectors for your lighting setup.
- Faulty Adapter
Lastly, there is a chance that you’ll run into problems with the faulty adapter. The quality of the power adapter is not too great, and it won’t last if there are too many power surges. So, if the LED lights are not working after a power surge, there is a good chance that the adapter is damaged. You’ll be able to secure a replacement from the Daybetter official dealer, and if you have a valid warranty, it shouldn’t be that hard to get a free adapter.
If you’re running into any other issues with the smart LED lights, make sure to involve the Daybetter dealer. He will help you narrow down the problems with the LED lights, and you won’t have to waste as much time troubleshooting the lights.