While the Cozylady LED lights are not the top options when it comes to lighting effects, they do bring a decent energy-efficient setup to your home. So, if you’re concerned about the power usage of the LED lights, going with this option might save you a bit of money in the long run. On top of that, you won’t have to concern yourself with as many durability issues while dealing with the Cozylady LED lights.
With that said, some users have been running into a few issues with the Cozylady LED lights remote not working. If you’re in a similar situation, then the following solutions should help you manoeuvre through the issue.
Fixing Cozylady LED Lights Remote Not Working
- Check Batteries
If your remote is not working, then the first thing you need to do is check the power status on the remote. There is a good chance that batteries on your remote have drained out, and you can verify that by checking the power light. The only thing you can do here is to purchase a compatible battery for the remote and install it in the unit.
Luckily, a new battery is not that expensive, and you can reach out to the dealer to secure a compatible battery. So, make sure to check the battery status if you’re dealing with the Cozylady LED lights remote not working.
- Pair Remote
Aside from the battery problems, pairing issues can also lead to a similar situation. The remote has to be paired up with the receiver that is connected to the light for optimal performance. Most users skip this step and don’t give any attention to the pairing process. So, if you’re sure that the remote has adequate power, just check the pairing status of the remote.
There is a good chance that the remote is not paired, and you can hold down the power button on the remote after turning on the paring mode in the receiver to fix this problem. It will barely take a minute and the issue will be fixed in no time.
- Remove Interference
Interferences between the receiver and the controller will also create these issues where the LED lights won’t respond to the remote. So, you should minimize these interferences and make sure that the remote is within the range of the receiver. A clear line of sight also helps improve the situation.
If you have a lot of smart lights in your home, then the different receivers can create some problems for the remote. So, make sure to isolate the problem by choosing a different location for the LED lights and testing the remote again.
- Reset Lights
Sometimes this issue with the remote not working can be traced back to some minor bugs in the system. So, you can always test your luck by resetting the Cozylady LED lights. So, make sure to follow the reset instructions in the manual and try to use the lights with the remote. There is a good chance that the lights will start working once you’ve gone through the reset procedure. A few owners have also mentioned that power cycling the lights can fix this issue with the remote not working. So, make sure also to give that a try before you completely reset the LED lights installed in your home.
- Contact Experts
If the issue is not fixed at this point, then the only thing you can do is reach out to the experts working at Cozylady customer support. Explain your issue to them, and they will help you narrow down on the issue. That way, you won’t have to waste time on troubleshooting methods that are not specifically meant for your situation.
All in all, these are a few things that you can do if the remote is not working for your Cozylady LED lights. In almost all situations, you will be dealing with a dead battery in the remote. So, make sure to start the troubleshooting process by fixing the battery connections, and there is a good chance that you won’t have to bother with any more steps. However, if the issue persists, make sure to involve the experts, and they will help you manoeuvre through the issue.