The Coredy Dash camera has caught the attention of thousands of customers across the nation with its affordable price tag and plenty of smart features. The amazing video quality and motion detection sensors allow drivers to keep a clear recording of every event. So, if you’re looking for a reasonably priced dash camera, going with Coredy might not be that bad of an option.
However, one problem that has disappointed some customers is that the Coredy dash cam won’t record the whole time. The saved file will be a bit patchy, and the issue is mostly related to SD card and motion detection issues. So, here are some solutions to help you along the way.
Coredy Dash Cam Not Recording The Whole Time Fix:
- Reinsert the SD Card
The first thing that you need to do is to reinsert the SD card back into the unit and then check the recording performance. Most of the time, the SD card is not recorded properly, or there is something wrong with the SD card compartment.
So, you’ll have to just take the card out and then put it back in properly. That should be enough to help with the recording issues, and you’ll get all the complete files onto your storage card.
- Check Motion Detection
The motion detection feature is another major reason behind patchy recording performance from your Coredy dash cam. So, if your unit is not recording, just go over the motion detection configurations.
You need to make sure that nothing is blocking the lens and that the camera is able to clearly see all movement in front of your car. Otherwise, the motion features won’t engage, and the camera will stop recording after a few seconds.
- Try Rebooting Your Camera
At this point, there is a chance that your issue is related to a programming bug that can be fixed by quickly rebooting the camera. So, you should remove power from the unit for a few minutes and then reboot the unit.
It will take a few minutes, but the camera will start responding to the motion as soon as the activity is detected in front of the car. So, just reboot the camera and then check the recording performance of your camera.
- Change Orientation
The orientation of the camera is the next thing that you need to check when the Coredy dash camera is not recording the whole time. So, make sure that the full view of the front is visible through the camera lens. That way, your unit won’t miss any activity through the camera, and you will be able to engage the dash camera every time the car is moving.
So, go through the manual instructions one more time and make sure that your camera lens is pointing in the right direction. That will fix the motion detection performance as well, and you won’t have to worry about missing footage.
- Check For Hardware Issues
There is always the possibility of hardware damage when the Coredy dash camera is not responding to any input. So, if you’re not getting any response from the camera even after going through all of these troubleshooting steps, then there is a good chance that your unit is damaged. The only thing that you can do about a damaged unit is to call the dealer for a replacement.
The warranty policy on these units is pretty decent, and it shouldn’t be that difficult to get a replacement. So, make sure to reach out to the professionals when you’re not getting the desired response from your Coredy device. Hopefully, you’ll be able to save yourself some budget that way.
- Factory Reset The Camera
On the other hand, if the camera is in good condition and the lens is completely clean, you might just have to factory reset the device. A quick reset should address all the programming issues, and you’ll be able to record all the events from this camera.
So, follow through with the reset routine and set up the camera according to the instructions on your manual. The orientation and the placement will play a key role in the final recording performance, and you won’t have to deal with the same problem when it comes to the Coredy camera.