6 Common YoLink Water Sensor Problems Troubleshooting

Having a water leak sensor might seem like an unnecessary purchase, but it will surely bring great utility to your system.

The best thing about this unit is that it will offer quick alerts as soon as there is a water leak, saving your appliances and floors from water damage.

Spending a few bucks on this purchase can potentially save you thousands of dollars in the long run, not to mention the money you’ll be saving on the water bill each month.

So, if you sometimes struggle with a water leak in your region, we suggest that you try out the YoLink Water sensor.

It is fairly simple to install and doesn’t bring extensive guides or setup routines to the owners.

So, if you’re not that sold on the idea of hiring an expert to help with the installation, you’ll be happy to know that you can do it yourself.

Common YoLink Water Sensor Problems Troubleshooting

However, that doesn’t mean that the YoLink system is free from every fault. There are still a few things that you need to track here and there to keep the unit in optimal shape.

Here are some details on Common YoLink Water Sensor Problems Troubleshooting that will help you manage the system.

1. Alerts Not Showing

The situation with the alerts not showing can be pretty annoying but can be linked to the battery status most of the time.

If you’ve been using the system for a while now, then there is a good chance that the battery has died out. Here, the only reliable fix is to get yourself a battery replacement.

While the battery life with this water leak sensor is pretty great, it can vary depending on the storage conditions.

You will have to put more focus on storing the unit properly and making sure that the unit is not installed in a colder region.

That will have a negative impact on the battery life, and the water leak sensor will die out sooner.

So, to avoid this problem, you need to find a more isolated spot where the temperature and moisture are both optimal.

Hopefully, your issue will be fixed right here, and you won’t have to struggle with more problems down the road when trying to manage the YoLink water sensor. 

2. No Indicator Response

Sometimes, the response from the indicator can also get halted, and you won’t be able to keep track of the leaks.

That kills the whole point of putting your money into a water leak sensor, and you’ll run into more issues down the road if you ignore the issue.

All that you need to do here is to adjust the water leak sensor by checking for hardware issues and power cycling the system.

Most of the time, fixing this issue will come easy to you, and you won’t have to worry about going through extensive routines or setup cycles to get the unit working again.

So, if you’re in the same boat and the unit won’t respond to any input, then fixing the indicator light by removing batteries for 20 minutes and then reconnecting them will do the job.

From there, you can check for the response, and the LED light will come on in no time.

However, if the issue remains unfixed after that, you can’t really rule out the possibility of hardware damage to the system.

So, be sure to keep that in mind if you’re struggling with the system and can’t seem to find a fix.

3. Connectivity Errors

Connectivity errors in the system can be incredibly annoying and can be linked more to the position of the hub.

You need to keep track of a lot of things to get the unit to work perfectly in certain conditions. So, be prepared to go through an extensive troubleshooting routine here.

If you’re sure about the issue and have narrowed down the situation, then it can be incredibly easy to fix.

However, if you’re not too sure about the situation and need more help to get through the fix, then that might add hours to the troubleshooting routine.

Some of the basic pointers that you need to keep in mind here are that the Wi-Fi band should be on 2.4 GHz, and there shouldn’t be too many wireless units.

From there, you can also adjust the distance between the router and the smart device.

Next, there is no harm in changing the credentials to remove the special characters. Lastly, you should also go over the proxy configurations one more time to try and adjust the system.

That will be more than enough to help you through the majority of these errors as you try to fix the device.

4. Pairing Issues

Pairing issues with the YoLink water leak sensor might not be that common, but they sure are frustrating.

You will find countless owners complaining about this issue as they try to adjust and fix the system. So, if you’re in the same boat, it can sometimes be hard to isolate the errors.

Luckily, you can follow through with the same methods underscored in the previous point to adjust the smart system accordingly.

A quick power cycle will go a long way when dealing with these minor errors.

So, be sure to keep that in mind as you try to adjust the system and cycle through more fixes.

That will be more than enough to not only help you fix the unit but also guide you through more situations down the road.

5. Battery Issues

Next, you might have to deal with battery issues as well if the unit is installed in a bad spot that is filled with water all the time.

The main point of this sensor is to alert the owners so that they can get rid of the water from the desired spot.

However, if you ignore this problem for too long and the water is allowed to collect in that spot, then that will likely damage the battery as well as the unit itself.

So, you will need to be a bit more proactive here and go through the fixes one more time.

That will be more than enough to help you through the majority of these situations.

However, if the damage is the same and you can see visible discoloration and gunk on the unit, then your only bet is to fix the situation by installing a new battery.

There are no other methods or quick fixes that can help you in this situation. So, be sure to keep that in mind and try to adjust the system by going through the solutions mentioned above.

Hopefully, you won’t have to bother with more errors down the road.

6. Alerts Showing In The App Only

The situation with the alerts only shows up on the application, and no response from the LED indicator shows that your unit is defective.

You’re not left with many options when the unit is defective, and you will have to claim the warranty here to get a new one.

However, as the last shot, you can still try resetting the unit and then connecting it with the hub one more time.

Some owners also pointed out that they were able to get through these errors by power cycling the system. So, all that you need to do here is to adjust the application accordingly.

From there, you won’t have to deal with the same errors. But if you do, then dealer support is always available to help you through these errors.

All that you need to do is to inform them about the errors that you’re facing, and they will take control of the situation.

Hopefully, you will be able to get your hands on the new device within no time. 

Wrapping Up

After going through the Common YoLink Water Sensor Problems Troubleshooting list above, you’ll get a better perspective on how to manage the system.

You can’t really stick with the unit if you find that there are hardware problems. So, you should always start by checking the unit for cracks and other damage.

Once you’re sure that the unit is in good shape, then going through the fixes listed here, along with the problems, will be more than enough to help you navigate the situation.

It all comes down to how you’re planning on maneuvering through the problem.

The dealer support offered by this brand is one of the best on the market, and you won’t be stuck with a defective unit for long.

So, be sure to reach out to the dealer and have him help you through the issue. He will make your job much easier, and you won’t have to spend hours of your time.

Hopefully, the dealer will be able to guide you through the intricate details of the troubleshooting guide, and you can demand a replacement if you do find the unit to be defective.

So, be sure to keep that in mind and reach out to the dealer for a new system.