Home security is no joke, and you’ll have to put serious consideration into finding the right unit for your smart home.
Most of the smart locks and relevant accessories can set you back hundreds of dollars. This is especially true if you’re upgrading the setup in your whole house.
However, this investment is well worth it in the long run, as you’ll be saving a ton of cash.
It doesn’t come down to the pricing only, and you need to only put focus on the consistency and reliability of these devices.
So, we suggest that you stick with some of the more established options like Yale.
Common Yale Wi-Fi and Bluetooth Upgrade Kit Problems Troubleshooting
It might be a bit on the expensive end, but you’ll get a phenomenal design with the inclusion of the Yale Wi-Fi and Bluetooth upgrade kit.
This unit is far better than any other option that you can find on the market. However, even the best accessories can sometimes malfunction.
So, we’ll be underscoring some of the common Yale Wi-Fi and Bluetooth Upgrade Kit Problems Troubleshooting methods to help you stay ahead of the issues.
- Kit Won’t Turn On
One of the first issues that you need to consider with this system is that it simply won’t turn on. Most of the time, this issue is not that serious and relates to the power flow to the unit.
You will be able to address this situation by fixing the power status.
First, you need to rely on the multimeter to make sure that the power output from the source is optimal.
If the power source is not supplying your kit with enough power, then you need to try a different one.
There is no point in sticking with the same power source, especially when you’ve been using the lock for a few years.
So, be sure to reach out to the dealer and get yourself some battery replacements for the lock.
He will guide you on what options are compatible with the lock. From there, it won’t be that hard for you to fix these errors.
All you have to do is to test out the new batteries and then proceed with the reset routine after the unit does turn on. That will be it most of the time.
- Not Connecting To Home Network
The situation with the Yale system not connecting with the home network can eliminate the whole point of spending money on this kit.
It can be incredibly frustrating, and you might also run into the same issues down the road.
If you do, just be sure to check the condition of the hardware first. Make sure that the kit is not damaged and that it is powered up properly.
Sometimes, removing the kit and then connecting it one more time will do the job.
On the other hand, if you’re still stuck in the same errors and can’t seem to isolate these issues, be sure to refresh the home network.
This includes removing power from the home network and then powering it back up.
It will only take a few seconds, and you will have to let the device power up completely before retrying the connection.
Ideally, the issue will be fixed right here, but there are quite a few methods that can help you further.
These methods include liming the range between the Wi-Fi unit and the kit, removing extra interferences from the unit.
Fixing the network configurations, removing the 5.0 GHz band, changing the credentials, and refreshing the proxy server are included as well.
So, if you are stuck in network connection errors, be sure to try out all of these fixes. That will be more than enough to help you get through these errors with the Yale system.
- Responsiveness Issues
The majority of responsiveness issues with the lock are related to ignored methionine cycles.
If you’ve not serviced the unit in a while, now might be a good time to check for obstructions as well as the battery status.
Most of the time, a bit of lubricating agent will go a long way when you’re trying to fix these errors. From there, it is not that hard to secure a quick response from the system.
It all comes down to the final condition of the lock, and you shouldn’t bother with the lock too much if the unit is damaged.
Claiming the warranty is the only real move, and you need to reach out to the dealer if the lock is in poor shape.
Depending on the warranty status, it won’t be too hard to secure a replacement.
All you have to do is to show a valid proof of purchase, and the dealer will take it from there.
Usually, you’ll get the new piece within the same week, and this issue will be fixed as soon as you install a replacement.
- Application Not Working
Sometimes, the issue is not with the lock but rather with the application not working.
While the application errors might not seem that significant, you will still need to isolate the issue to get the lock to engage properly.
Is there any point in purchasing a smart unit when you can’t use the application associated with the brand?
So, be sure to go through the basic troubleshooting methods like resetting the app or going through an update to fix the app.
All you need to do is to start out by updating the application. You need to check the current version of the application and then update that application to the latest version.
From there, you need to adjust the cached data by wiping it from the phone.
To do that, you need to first open up the smart application settings from the phone settings and then head over to the stored data section.
From there, you can clear all of the stored data, and that will reset the system.
Similarly, if you run into these issues after updating the application, then you need to install a previous version.
You can find the older versions on Google, and going to any APK platform will have you served with all of the older versions of this application.
- Compatibility Errors
This kit is not compatible with all of the systems, and you need to only stick with the Azure locks to get through the auto-unlocking features.
There are no quick methods here that can be implemented to help you get through the installation.
So, if you do run into compatibility issues with the lock, you will just need to get a new unit.
You will have to spend a bit of your budget here, and there are no methods that can enable you with a free unit.
- Smart Assistant Not Working
Lastly, the most annoying issue with this unit is that it won’t work with a smart assistant like Alexa.
This will take a lot of utility out of the kit, especially when you have spent close to 150 dollars on the unit.
So, if you’re in the same boat as this assistant, be sure to reset the skill.
This includes removing the smart skill and then reinstalling the application before adding the skill again to the smart system.
Most of the time, that will be it, but some owners have had to reset the device itself to isolate these errors.
So, it all comes down to the final situation with the kit, and you can’t really get the device working when it is damaged.
For this reason, you should always check for hardware issues first.
Once that is done, you can try different configurations, like changing the smart skill, adding variations, and much more.
So, be creative with the Alexa unit and then test out different configurations if you can’t seem to isolate the issues.
Most of the time, that will be it when you’re running into errors with the smart system.
Wrapping UP
This comprehensive list of common Yale Wi-Fi and Bluetooth Upgrade Kit Problems Troubleshooting methods should be more than enough for most owners.
It will help you keep track of the unit maintenance, and you won’t have to worry about anything with the system.
A bit of maintenance goes a long way with these smart devices, and your entire focus should be on keeping the unit clean and away from rougher environments.
That will be more than enough to help you through minor errors with the system.
However, if you do find hardware issues with this kit, then you need to reach out to the dealer about a replacement.
Luckily, the warranty policy on this system is more than enough to help you get through minor errors. From there, it is not that hard to set up the new unit.
Similarly, you can also reach out to the official Yale support about the claim. They will ask you for a few details before guiding you through intricate details of relevant fixes.
Hopefully, that will be it when you’re dealing with the majority of programming bugs or hardware errors.