Are you considering buying a WOPET 6L Automatic Cat Feeder for your feline friend? While these automatic feeders offer a great way to keep your cat fed on schedule, they can come with some problems.
In this article, we will look at 8 of the most common problems with WOPET 6L Automatic Cat Feeders and provide solutions to each one.
Common WOPET 6L Automatic Cat Feeder Problems Troubleshooting
Keep reading to learn more about how to troubleshoot any issues you may have with your automatic feeder.
- The Feeder Leaks
This is a common problem with the WOPET 6L Automatic Cat Feeder, especially if the feeder is being used for wet or semi-moist food.
To fix this issue, make sure to tighten the lid and check for any loose parts or cracks that may be causing the leaking.
If that doesn’t work, try replacing the rubber seal and cleaning the area around the lid to prevent any more leaks.
You may also need to replace the seal every few months if your cat is fed wet food. If you still can’t get the feeder to stop leaking, you may need to contact WOPET customer service for additional help.
- The Feeder Isn’t Dispensing Food
If your WOPET 6L Automatic Cat Feeder is not dispensing food, the most likely cause is a blockage in the feeder.
To fix this issue, first check to make sure there is no debris or other objects stuck in the food outlet. If there is, gently remove it and try again.
If the feeder still isn’t dispensing food, you may need to reset the portion sizes. This is done by pressing the “settings” button and then using the arrow keys to adjust the portion size. Make sure the portion size is large enough to dispense the food.
Finally, if the feeder still isn’t dispensing food, you may need to replace the motor. This can be done by unscrewing the screws on the underside of the feeder and removing the motor.
Then, you can purchase a replacement motor and install it. This should solve the problem.
- The Feeder Is Making Noise
If your WOPET 6L Automatic Cat Feeder is making noise, it could be due to a few different things. First, make sure that the feeder isn’t close to any other appliances or items that could cause a vibration.
If the noise persists, check to see if there is any debris or food particles stuck in the feeder’s auger mechanism, as this can cause the motor to run noisily.
If the noise still continues, contact WOPET directly for support. They have technicians available who can assist you in troubleshooting and fixing the problem.
Additionally, another common issue people experience with the WOPET 6L Automatic Cat Feeder is overfeeding.
This occurs when too much food dispenses from the feeder at once which can lead to an unhealthy number of calories ingested by your cat.
To fix this issue, adjust the portion size setting on the machine using the small portion dial located on the lid. This will help ensure that only a single portion of food is dispensed each time.
- The Feeder Isn’t Sturdy
If you’ve noticed that your WOPET 6L Automatic Cat Feeder isn’t as sturdy as it once was, you may need to make some adjustments.
The main problem with this feeder is that it’s made of lightweight plastic which can become easily damaged over time. Fortunately, there are some simple solutions to make it more stable.
First, you should make sure the feeder is properly assembled. If the parts aren’t tightened correctly, it won’t be as sturdy as it should be. You can check the assembly instructions to ensure everything is secure and that no pieces are missing.
You can also add extra support for the feeder by placing it on a non-slip mat. This will help to keep the feeder from sliding or tipping over. Alternatively, you can use double-sided tape to attach the feeder to the floor or a table.
Finally, if you have cats that are particularly active, it may be wise to invest in a heavier feeder. A heavier feeder will be able to withstand their playful nature and provide greater stability.
- The Feeder Is Difficult To Clean
Cleaning your WOPET 6L Automatic Cat Feeder can be a tricky task. Not only is the feeder itself hard to access, but its many parts and pieces can be difficult to clean without the right tools and knowledge.
Here are some tips on how to clean your feeder properly:
- First, remove the hopper, tray, and bowl from the feeder. These should be cleaned with warm soapy water and a soft sponge. Rinse with warm water and dry thoroughly before reassembling.
- Next, clean the inside of the feeder body with a damp cloth or a damp sponge. Be sure to wipe away any debris and residue that might have built up over time. Make sure the feeder body is completely dry before you put the other components back in.
- Use a soft bristled brush or a vacuum cleaner to clean the nooks and crannies of the feeder. This will ensure that all debris is removed from the small crevices.
- Finally, use a mild detergent and warm water to clean the outside of the feeder. Wipe it dry with a soft cloth and make sure it’s completely dry before you plug it in again.
- The Feeder Isn’t Compatible With Certain Types Of Food
The WOPET 6L Automatic Cat Feeder is designed to work with dry food only, so it may not be compatible with wet or canned foods.
Some customers have reported that their feeders do not work with semi-moist food either.
If you find that your feeder isn’t compatible with the type of food you’re trying to use, there are a few things you can do:
- Make sure that you are using only dry food and that it is in small enough pieces to fit through the opening of the feeder. The feeder is designed to accept pieces of kibble no larger than 0.5 inches (1.2 cm) in diameter.
- If you are using kibble, make sure that it is not clumped together in the bag. Clumped kibble can cause the feeder to jam and won’t be able to pass through the opening.
- Make sure that the food has been stored in a dry place and that it is not expired. Expired food can clump together and cause the feeder to jam.
- Make sure that you are following the instructions for loading the food correctly. It’s important to ensure that the food is evenly distributed in the hopper so that it doesn’t clog up the machine.
- Check the batteries and make sure that they are properly installed and functioning correctly. A faulty battery can cause the feeder to malfunction.
- Push Notifications Not Working
If you’ve recently purchased the WOPET 6L Automatic Cat Feeder, you may have noticed that it does not come with push notifications.
This can be an issue for pet owners who want to ensure their cats are eating properly. Fortunately, there are a few easy ways to troubleshoot this problem and get your feeder back up and running.
The first step is to make sure your WOPET 6L Automatic Cat Feeder is properly connected to a power source.
This can often be done by plugging the device into a wall outlet or using a compatible USB cable. If you’re using a USB cable, make sure it is securely connected to both the feeder and your computer or phone.
Next, check to see if your device is connected to the internet. If not, try connecting it to your home Wi-Fi network.
Once you have done this, open the WOPET app on your phone or computer and select “Settings”. From here, you should be able to enable push notifications.
If you’re still having trouble getting push notifications to work, try restarting the WOPET 6L Automatic Cat Feeder.
To do this, unplug the device from the power source, wait a few seconds, and then plug it back in. This should reset the feeder and allow it to connect to the internet once again.
Finally, if none of these steps have worked, contact customer support for assistance. The team at WOPET can help you diagnose and resolve any issues with push notifications on your feeder.
- Disconnects From Network
One of the most common issues people experience with their WOPET 6L Automatic Cat Feeder is that it disconnects from the network.
This can be a frustrating problem, especially if you rely on the feeder for remote feeding when you’re away from home. Fortunately, there are a few steps you can take to troubleshoot this issue.
First, make sure that the Wi-Fi signal is strong enough to support the feeder. If the signal is weak or intermittent, the feeder may disconnect.
Try moving the router closer to the feeder or using a Wi-Fi range extender to improve signal strength. If that doesn’t help, make sure that the feeder is securely connected to the power outlet.
If the connection is loose, it could be the reason why it’s disconnecting from the network. Try unplugging and plugging it back in firmly.
Finally, check to see if there are any updates available for your feeder’s firmware. If there are any updates available, download and install them. This should help to resolve any connectivity issues you’re experiencing.